Greetings.
Seeking guidance on adding a USB barcode reader (BCR) to an HP c3750 workstation with HP-UX 11.11 which is essentially configuring X windows to accept input from both a primary keyboard and a secondary keyboard that happens to be the BCR.
Historically, I have successfully added a BCR to an HP c3600 workstation with HP-UX 10.20 and a c3700 with HP-UX 11.11 by configuring X windows to accept input from both a primary keyboard and a secondary keyboard as stated above by adding the following lines to /etc/X11/X0devices :
Begin_Device_Description
Name hp7lc2k.1 # USB Barcode reader driver name
Use Other # This is an "Other" device
Path /dev/hid/kbd_001 # Second keyboard device file
End_Device_Description
However, this does not work for the c3750. Adding the above lines to /etc/X11/X0devices does not appear to have any discernible effect on configuring X windows to accept input from two keyboards. A review of X windows generated logs shows no errors. X windows behaves as if no modifications where made to X0devices. The c3750 accepts input from either the primary keyboard or the BCR but not both.