Hi,
I`m on SunFire480R with Solaris 10. Disk in rootdg group failed, so it was replaced. However, I cannot make Veritas initalise the replaced disk:
# vxdctl enable
# vxdisk list c1t0d0s2
Device: c1t0d0s2
devicetag: c1t0d0
type: auto
flags: online error private autoconfig
errno: Device path not valid
Multipathing information:
numpaths: 1
c1t0d0s2 state=disabled
# vxdisksetup -i c1t0d0
VxVM vxdisk ERROR V-5-1-5433 Device c1t0d0s2: init failed:
Device path not valid
# vxdisk list
DEVICE TYPE DISK GROUP STATUS
c1t0d0s2 auto:cdsdisk - - error
c1t1d0s2 auto:sliced rootmirror rootdg online
c2t0d15s2 auto:sliced - - online
c2t0d16s2 auto:sliced - - online
c2t0d17s2 auto:sliced - - online
c2t0d18s2 auto:sliced - - online
c2t0d19s2 auto:sliced - - online
c2t0d20s2 auto:sliced - - online
c2t0d21s2 auto:sliced - - online
c2t0d22s2 auto:sliced emc04A1 RMANbak online
c2t0d26s2 auto:cdsdisk emc0012 sparermanpool online
c2t0d27s2 auto:cdsdisk emc0065 sparermanpool online
c2t0d28s2 auto:cdsdisk emc006b sparermanpool online
c2t0d29s2 auto:cdsdisk emc0075 sparermanpool online
c2t0d30s2 auto:cdsdisk emc007f sparermanpool online
c2t0d31s2 auto:cdsdisk emc0080 sparermanpool online
c2t0d33s2 auto:cdsdisk emc0081 sparermanpool online
- - rootdisk rootdg removed was:c1t0d0s2
# luxadm probe
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node WWN:20000004cf9f66f4 Device Type:Disk device
Logical Path:/dev/rdsk/c1t0d0s2
Node WWN:2000000c504ee620 Device Type:Disk device
Logical Path:/dev/rdsk/c1t1d0s2
What should I do? Any advice?...
Thanks!