This is what is displayed on the screen as the system tries to boot and then hangs:
0>Test CPU(s)....Done
0>Interrupt Crosscall....|
SC Alert: DHCP negotiation failed, perhaps misconfigured or no DHCP server avail
able
Done
0>Init Memory....|
SC Alert: Host System has Reset
'Done
0>PLL Reset....Done
0>Init Memory....Done
0>Test Memory....-
0>ERROR: TEST = Address Bitwalk on Master
0>H/W under test = CPU0 B1/D1 J0702 side 1 (Bank 2), CPU Module C0
0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
0>MSG = Pin 175 failed on CPU0 B1/D1 J0702 side 1 (Bank 2), CPU Module C0
0>END_ERROR
0>Test CPU(s)....Done
0>Interrupt Crosscall....|
SC Alert: DHCP negotiation failed, perhaps misconfigured or no DHCP server avail
able
Done
0>Init Memory....|
SC Alert: Host System has Reset
'Done
0>PLL Reset....Done
0>Init Memory....Done
0>Test Memory....-
0>ERROR: TEST = Address Bitwalk on Master
0>H/W under test = CPU0 B1/D1 J0702 side 1 (Bank 2), CPU Module C0
0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
0>MSG = Pin 175 failed on CPU0 B1/D1 J0702 side 1 (Bank 2), CPU Module C0
0>END_ERROR
ERROR: /pci@1e,600000: Last Trap: Fast Data Access MMU Miss
Kindly advise.