telnet or rsh or ftp to an AIX machine takes too much time, like have to wait 3 minutes before the prompt appears.
What can I look to troubleshoot this problem
thanks
telnet or rsh or ftp to an AIX machine takes too much time, like have to wait 3 minutes before the prompt appears.
What can I look to troubleshoot this problem
thanks
Check for DNS resolving issues and check if there is a performance problem on the box you come from or where you go as destination. Maybe also check if there is a network problem with something like traceroute
.
traceroute
C:\>tracert 10.1.1.100
Tracing route to 10.1.1.100 over a maximum of 30 hops
1 13 ms <1 ms <1 ms 10.1.1.101
Trace complete.
how can I check for network problem or performance issue on the box where i want to telnet to ?
thanks
As Zaxxon says, the first thing to check is the DNS service. The delay could be all caused by a very slow resolution process.
What happens if instead of
telnet <nodename>
you enter
telnet <ip address>
Do you still see the delay?
Otherwise, can you introduce a third system into this and see if you can tell which node is causing the problem?
Also, just noticed you are using 10.1.1.* ip addresses. Are you sure that your network knows that these ip's are local and not out in the big wide world?
telnet <nodename>
telnet <ip address>
Both give delay of more than 3 minutes for the login , but another machine on the same network works fine IP and nodename.
How can I isolate the problem to DNS or server-performance-issue ?
DNS is windows DNS Server..
POST-SCRIPT: ISSUE SOLVED
Deleted the file /etc/resolv.conf
the file had an entry
and removed name-server and stopped nameserver from smitty tcpip
Issue resolved.
as Zaxxon said, the first issue to look for should be DNS.