I have been working on this one for a few days. Any help/advice would be greatly appreciated.
Hardware
Machine: Sun Blade 2000
Tape Drives: HP Ultrium LTO2 002 (x2) (Inside an L40)
Software
OS: Solaris 8
st.conf uncommented lines:
probe-scsi-all reports both drives.
/dev/rmt is empty.
I suspect that the drives are being recognized by the hardware, however, our configuration is not correct. Are we missing anything obvious? If the drives are configured correctly, should /dev/rmt have something in it?
Again, any help/advice would be greatly appreciated.
Thanks,
Sean