After we upgraded one PW450 machine from (networker 7.2 & solaris 9) to (networker 7.4 and solaris 10) through scratch installation
Only one of two HP tape drives is shown in inquire command
And we are getting strange logs in messages file (attached)
For 2nd drive 1cbn character specific file is absent.
But its patch is present in /etc/path_to_inst file
Any one has any idea how to solve this problem?
May 25 11:38:18 laho2b <HP Ultrium>
May 25 11:38:27 laho2b scsi: [ID 193665 kern.info] sgen30 at fjulsa2: target 4 lun 0
May 25 11:38:27 laho2b genunix: [ID 936769 kern.info] sgen30 is /pci@80,2000/FJSV,ulsa@1/sgen@4,0
May 25 11:39:21 laho2b pseudo: [ID 129642 kern.info] pseudo-device: llc10
May 25 11:39:21 laho2b genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1@0
May 25 11:39:21 laho2b pseudo: [ID 129642 kern.info] pseudo-device: fcp0
May 25 11:39:21 laho2b genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp@0
May 25 11:39:21 laho2b pseudo: [ID 129642 kern.info] pseudo-device: fcsm0
May 25 11:39:21 laho2b genunix: [ID 936769 kern.info] fcsm0 is /pseudo/fcsm@0
May 25 11:39:21 laho2b pseudo: [ID 129642 kern.info] pseudo-device: fbt0
May 25 11:39:21 laho2b genunix: [ID 936769 kern.info] fbt0 is /pseudo/fbt@0
May 25 11:39:21 laho2b pseudo: [ID 129642 kern.info] pseudo-device: profile0
May 25 11:39:21 laho2b genunix: [ID 936769 kern.info] profile0 is /pseudo/profile@0
May 25 11:39:21 laho2b pseudo: [ID 129642 kern.info] pseudo-device: systrace0
May 25 11:39:21 laho2b genunix: [ID 936769 kern.info] systrace0 is /pseudo/systrace@0
May 25 11:39:21 laho2b pseudo: [ID 129642 kern.info] pseudo-device: sdt0
May 25 11:39:21 laho2b genunix: [ID 936769 kern.info] sdt0 is /pseudo/sdt@0
May 25 11:39:21 laho2b pseudo: [ID 129642 kern.info] pseudo-device: winlock0
May 25 11:39:21 laho2b genunix: [ID 936769 kern.info] winlock0 is /pseudo/winlock@0
scsidev@3.3.0:HP Ultrium 2-SCSI S63U|Tape, /dev/rmt/0cbn
root@laho2b# ls -tlr /dev/rmt/0cbn
lrwxrwxrwx 1 root root 48 May 20 16:00 /dev/rmt/0cbn -> ../../devices/pci@80,2000/FJSV,ulsa@1/st@3,0:cbn
root@laho2b# ls -tlr /dev/rmt/1cbn
/dev/rmt/1cbn: No such file or directory
root@laho2b# cat /etc/path_to_inst|grep "pci@80,2000/FJSV,ulsa@1/st@3"
"/pci@80,2000/FJSV,ulsa@1/st@3,0" 3 "st"
root@laho2b# cat /etc/path_to_inst|grep "pci@80,2000/FJSV,ulsa@1/st@4"
"/pci@80,2000/FJSV,ulsa@1/st@4,0" 4 "st"
root@laho2b#
root@laho2b# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c2 scsi-bus connected configured unknown
c2::dsk/c2t0d0 CD-ROM connected configured unknown
usb0/1 unknown empty unconfigured ok
usb0/2 unknown empty unconfigured ok