This questions only concerns Solaris 10.
Let's say I have swap configured like so in /etc/vfstab:
/dev/dsk/c1t0d0s1 - - swap - no -
/dev/dsk/c1t1d0s1 - - swap - no -
/dev/md/dsk/d1 - - swap - no -
and in SVM:
d1: Mirror
Submirror 0: d901
State: Okay
Submirror 1: d911
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 20962560 blocks (10.0 GB)
d901: Submirror of d1
State: Okay
Size: 20962560 blocks (10.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t0d0s1 0 No Okay Yes
d911: Submirror of d1
State: Okay
Size: 20962560 blocks (10.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c0t1d0s1 0 No Okay Yes
If the mirror stays intact and one of the other drives (either /dev/dsk/c1t0d0s1or /dev/dsk/c1t1d0s1) fail, will my system panic and crash or just give a warning message and continue on?
What if one the mirrored drives fails? Will the system panic and crash or continue on with an error message.
Thanks in Advance!