Sunfire V880 Internal Disk Problem

jamba1 · July 7, 2009, 8:37pm

Any help on this would be greatly appreciated. I have read other threads on similar subject but still not clear on what this is telling me and what action to take. Do I have a couple of disks that are slowly dying?

While checking disk usage on the V880 I noticed the following:

# format
Searching for disks...done

AVAILABLE DISK SELECTIONS:
0. c1t0d0 <drive type unknown>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf8f890c,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf8f8b20,0
2. c1t2d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf8f4df8,0
3. c1t3d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf8f3dca,0
4. c1t4d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf8f87ca,0
5. c1t5d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf8f562c,0

# prtvtoc /dev/dsk/c1t0d0s2
prtvtoc: /dev/rdsk/c1t0d0s2: Unable to read Disk geometry

# iostat -E
sd6 Soft Errors: 0 Hard Errors: 1 Transport Errors: 0
Vendor: TOSHIBA Product: DVD-ROM SD-M1401 Revision: 1009 Serial No: 12/20/00
Size: 18446744073.71GB <-1 bytes>
Media Error: 0 Device Not Ready: 1 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
ssd0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST336605FSUN36G Revision: 0438 Serial No: 0215P1J5T3
Size: 36.42GB <36418595328 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
ssd1 Soft Errors: 1 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST336605FSUN36G Revision: 0438 Serial No: 0215P1HWBB
Size: 36.42GB <36418595328 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 1
Illegal Request: 0 Predictive Failure Analysis: 0
ssd2 Soft Errors: 0 Hard Errors: 65 Transport Errors: 2
Vendor: SEAGATE Product: ST336605FSUN36G Revision: 0438 Serial No: 0216P1JJG7
Size: 36.42GB <36418595328 bytes>
Media Error: 0 Device Not Ready: 61 No Device: 1 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 1
ssd3 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST336605FSUN36G Revision: 0438 Serial No: 0216P1JP3C
Size: 36.42GB <36418595328 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
ssd4 Soft Errors: 0 Hard Errors: 15 Transport Errors: 4
Vendor: SEAGATE Product: ST336605FSUN36G Revision: 0438 Serial No: 0215P1J3D7
Size: 36.42GB <36418595328 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 3 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0
ssd5 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Vendor: SEAGATE Product: ST336605FSUN36G Revision: 0438 Serial No: 0216P1J1VV
Size: 36.42GB <36418595328 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0 Predictive Failure Analysis: 0

# luxadm display /dev/rdsk/c1t0d0s2
DEVICE PROPERTIES for disk: /dev/rdsk/c1t0d0s2
Status(Port A): Not Ready
Vendor: SEAGATE
Product ID: ST336605FSUN36G
WWN(Node): 20000004cf8f890c
WWN(Port A): 21000004cf8f890c
Revision: 0438
Serial Num: 3FP1JJG70000
Location: In the enclosure named: FCloop
Device Type: Disk device
Path(s):
/dev/rdsk/c1t0d0s2
/devices/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf8f890c,0:c,raw

$ tail -f /var/adm/messages

Jul 7 11:15:40 sealydata scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf8f890c,0 (ssd2):
Jul 7 11:15:40 sealydata Error for Command: load/start/stop Error Level: Retryable
Jul 7 11:15:40 sealydata scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Jul 7 11:15:40 sealydata scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Number: 0216P1JJG7

Jul 7 11:15:40 sealydata scsi: [ID 107833 kern.notice] Sense Key: Not Ready
Jul 7 11:15:40 sealydata scsi: [ID 107833 kern.notice] ASC: 0x4 (LUN not ready), ASCQ: 0x0, FRU: 0x2
Jul 7 11:15:42 sealydata scsi: [ID 107833 kern.warning] WARNING: /pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w21000004cf8f890c,0 (ssd2):
Jul 7 11:15:42 sealydata Error for Command: test unit ready Error Level: Retryable
Jul 7 11:15:42 sealydata scsi: [ID 107833 kern.notice] Requested Block: 0 Error Block: 0
Jul 7 11:15:42 sealydata scsi: [ID 107833 kern.notice] Vendor: SEAGATE Serial Number: 0216P1JJG7

Some other information

# iostat -e
---- errors ---
device s/w h/w trn tot
md0 0 0 0 0
md1 0 0 0 0
md2 0 0 0 0
md3 0 0 0 0
md4 0 0 0 0
md5 0 0 0 0
md6 0 0 0 0
md7 0 0 0 0
md8 0 0 0 0
md9 0 0 0 0
md10 0 0 0 0
md11 0 0 0 0
md12 0 0 0 0
md13 0 0 0 0
md14 0 0 0 0
md15 0 0 0 0
md16 0 0 0 0
md17 0 0 0 0
sd6 0 1 0 1
ssd0 0 0 0 0
ssd1 1 0 0 1
ssd2 0 77 2 79
ssd3 0 0 0 0
ssd4 0 15 4 19
ssd5 0 0 0 0
nfs1 0 0 0 0
nfs2 0 0 0 0
nfs3 0 0 0 0
nfs4 0 0 0 0

# iostat -en
---- errors ---
s/w h/w trn tot
0 0 0 0 d0
0 0 0 0 d1
0 0 0 0 d2
0 0 0 0 d3
0 0 0 0 d4
0 0 0 0 d5
0 0 0 0 d6
0 0 0 0 d7
0 0 0 0 d8
0 0 0 0 d9
0 0 0 0 d10
0 0 0 0 d11
0 0 0 0 d12
0 0 0 0 d13
0 0 0 0 d14
0 0 0 0 d15
0 0 0 0 d16
0 0 0 0 d17
0 1 0 1 c0t6d0
0 0 0 0 c1t5d0
1 0 0 1 c1t3d0
0 77 2 79 c1t0d0
0 0 0 0 c1t1d0
0 15 4 19 c1t2d0
0 0 0 0 c1t4d0

module: ssderr instance: 2
name: ssd2,err class: device_error
crtime 68.4087818
Device Not Ready 76
Hard Errors 80
Illegal Request 0
Media Error 0
No Device 1
Predictive Failure Analysis 1
Product ST336605FSUN36G
Recoverable 0
Revision 0438
Serial No 0216P1JJG7
Size 36418595328
snaptime 13640474.1636295
Soft Errors 0
Transport Errors 2
Vendor SEAGATE

module: ssderr instance: 4
name: ssd4,err class: device_error
crtime 68.4438518
Device Not Ready 0
Hard Errors 15
Illegal Request 0
Media Error 0
No Device 3
Predictive Failure Analysis 0
Product ST336605FSUN36G
Recoverable 0
Revision 0438
Serial No 0215P1J3D7
Size 36418595328
snaptime 13640480.8315098
Soft Errors 0
Transport Errors 4
Vendor SEAGATE

[COLOR=black]# metastat | more
d0: Mirror
Submirror 0: d1
State: Needs maintenance
Submirror 1: d12
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 10241505 blocks

d1: Submirror of d0
State: Needs maintenance
Invoke: metareplace d0 c1t0d0s0 <new device>
Size: 10241505 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s0 0 No Maintenance

d12: Submirror of d0
State: Okay
Size: 10241505 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t1d0s0 0 No Okay

d2: Mirror
Submirror 0: d3
State: Needs maintenance
Submirror 1: d13
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 4096602 blocks

d3: Submirror of d2
State: Needs maintenance
Invoke: metareplace d2 c1t0d0s1 <new device>
Size: 4096602 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s1 0 No Maintenance

d13: Submirror of d2
State: Okay
Size: 4096602 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t1d0s1 0 No Okay

d4: Mirror
Submirror 0: d5
State: Needs maintenance
Submirror 1: d14
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 8193204 blocks

d5: Submirror of d4
State: Needs maintenance
Invoke: metareplace d4 c1t0d0s3 <new device>
Size: 8193204 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s3 0 No Maintenance

d14: Submirror of d4
State: Okay
Size: 8193204 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t1d0s3 0 No Okay

d6: Mirror
Submirror 0: d7
State: Needs maintenance
Submirror 1: d15
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 40162878 blocks

d7: Submirror of d6
State: Needs maintenance
Invoke: metareplace d6 c1t0d0s7 <new device>
Size: 40162878 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s7 0 No Maintenance

d15: Submirror of d6
State: Okay
Size: 40162878 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t1d0s7 0 No Okay

d8: Mirror
Submirror 0: d9
State: Needs maintenance
Submirror 1: d16
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 58490694 blocks

d9: Submirror of d8
State: Needs maintenance
Invoke: metareplace d8 c1t0d0s5 <new device>
Size: 58490694 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t2d0s7 0 No Maintenance
Stripe 1:
Device Start Block Dbase State Hot Spare
c1t0d0s5 0 No Maintenance

d16: Submirror of d8

State: Okay
Size: 58490694 blocks
Stripe 0:
    Device              Start Block  Dbase State        Hot Spare
    c1t3d0s7                   0     No    Okay
Stripe 1:
    Device              Start Block  Dbase State        Hot Spare
    c1t1d0s5                   0     No    Okay

d10: Mirror
Submirror 0: d11
State: Needs maintenance
Submirror 1: d17
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 92049318 blocks

d11: Submirror of d10
State: Needs maintenance
Invoke: metareplace d10 c1t2d0s1 <new device>
Size: 92049318 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t4d0s7 0 No Okay
Stripe 1:
Device Start Block Dbase State Hot Spare
c1t2d0s1 0 No Maintenance
Stripe 2:
Device Start Block Dbase State Hot Spare
c1t4d0s1 0 No Okay

d17: Submirror of d10
State: Okay
Size: 92049318 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t5d0s7 0 No Okay
Stripe 1:
Device Start Block Dbase State Hot Spare
c1t3d0s1 0 No Okay
Stripe 2:
Device Start Block Dbase State Hot Spare
c1t5d0s1 0 No Okay

[/COLOR]

frozentin · July 7, 2009, 11:59pm

Your c1t0d0 looks like it is dead, replace it. If I were in your place, I would get c1t2d0 replaced asap.

Can't help you with SVM issues though.

DukeNuke2 · July 8, 2009, 2:33am

To keep the forums high quality for all users, please take the time to format your posts correctly.

First of all, use Code Tags when you post any code or data samples so others can easily read your code. You can easily do this by highlighting your code and then clicking on the # in the editing menu. (You can also type code tags

```text
 and 
```

by hand.)

Second, avoid adding color or different fonts and font size to your posts. Selective use of color to highlight a single word or phrase can be useful at times, but using color, in general, makes the forums harder to read, especially bright colors like red.

Third, be careful when you cut-and-paste, edit any odd characters and make sure all links are working property.

Thank You.

The UNIX and Linux Forums

jamba1 · July 22, 2009, 8:41am

Thanks for your response Frozentin. After some research I replaced c1t0d0 (boot disk) using luxadm and meta commands which was mirrored with c1t1d0. c1t2d0 is next as soon as I get a replacement disk.