Hi Guys
i have two servers which are n cluster prd1 and prd2.. I already have a metaset configured in it..My job was to create a 1.8 tb LUN in my storage which is having Hardware raid5 pre-configured..i Created 1.8 tb with raid 5 in my storage and it got detected in both t servers prd1 prd2 and i got my DID id same in both..fine with that..its like /dev/rdsk/c4t600A0B80004836600000057E4BAC04EFd0 /dev/did/rdsk/d8...wen i try to attach it to my metaset im not able to do that because i think its raw disk and its takin default slice as S0..so i tried to create a new file system on it but its sayin no such file or directory...il post my output of that disk...slice 8 is present i dont kno how it has come...
---------- Post updated at 05:41 AM ---------- Previous update was at 05:40 AM ----------
here is t files..
whats the output of metastat ?
What is the exact Solaris version you are running? It was not possible to use LUNs over 1 TB in earlier Solaris versions.
If this is a hardware raid 5 then metastat does not come into it does it?
If the volume is not too big for the version of Solaris you are using and you are using the whole volume then might as well newfs s2 and then mount s2.
@hergp
Solaris 9 9/05 s9s_u8wos_05 SPARC
Copyright 2005 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 04 August 2005
this is t version...
i dont have a slice s2...i allocated 1.8 tb to s0..s8 is reserved sllice..thats it..
s2 should be the whole volume.