Storedge Configuration

Hi Community,

I'm working on Solaris 10 installation with 1 Sun Server V490 and 1 StoredgeTek 3510 (Standalone configuration).

I connected the Server to the Storedge with 1 fiber cables and I created 3 LUNs with RAID1 Configuration.

Today I've a problem, infact I have to connect a second fiber cable (for multipathed concept and HA).
After I've connected it I entered "reboot -- -r" command to reconfigure the devices and, to verify that the LUNs had visible, I extracted the first cable (leaving the second attached), and I entered "format" command. But the system doesn't look neither the LUNs neither the Internal Disks.

Do you know any solution?

How can I let understand to the Storedge that the Disks have to be read from the second cable also?

Thank you for your availbility!

you've to enable multipathing for the external devices. watch out to spare the internal disks! you need to read "man stmsboot" and have a look at "/kernel/drv/fp.conf".

Thank you very much Duke,

do you know any procedure? Could you describe it ?

thanks in advance

Solaris SAN Configuration and Multipathing Guide - Sun Microsystems