solaris routing between two networks

UNIX Solaris
1 
ce0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 2
        inet 10.162.212.132 netmask ffffff00 broadcast 10.162.212.255
        ether 0:14:4f:55:82:9
ce1: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 1500 index 3
        inet 10.231.11.232 netmask ffff0000 broadcast 10.231.255.255
        ether 0:14:4f:55:82:a

I want to access 10.231.0.0 network when I'm sitting behind 10.162.212. network

can someone please help me to use IPF on solaris-10.

Regards,
BB

2

just enable it... look for the right SMF (svcs -a | grep forward) and start it (svcadm enable ...).

3

enable what...

# routeadm -u -e ipv4-forwarding
# routeadm
              Configuration   Current              Current
                     Option   Configuration        System State
---------------------------------------------------------------
               IPv4 routing   disabled             disabled
               IPv6 routing   disabled             disabled
            IPv4 forwarding   enabled              enabled
            IPv6 forwarding   disabled             disabled

           Routing services   "route:default ripng:default"

Routing daemons:

                      STATE   FMRI
                   disabled   svc:/network/routing/legacy-routing:ipv4
                   disabled   svc:/network/routing/legacy-routing:ipv6
                   disabled   svc:/network/routing/ndp:default
                   disabled   svc:/network/routing/rdisc:default
                   disabled   svc:/network/routing/ripng:default
                   disabled   svc:/network/routing/ripng:quagga
                   disabled   svc:/network/routing/route:default
                   disabled   svc:/network/routing/zebra:quagga
                   disabled   svc:/network/routing/rip:quagga
                   disabled   svc:/network/routing/ospf:quagga
                   disabled   svc:/network/routing/ospf6:quagga
                   disabled   svc:/network/routing/bgp:quagga
4

You need to specify either static or dynamic rule for updating routing tables so please look at

man routeadm

If you run IPv4 on your corporate network you must enable intranet forwarding using this service

svc:/network/routing/legacy-routing:ipv4

If you want use IPfilter to redirect traffic from some network card to other you can use rule set like this one

pass in  on e1000g00 from 192.168.0.0/24 to 192.168.0.1
pass out on e1000g00 from 192.168.0.1 to 192.168.0.0/24

But to get more secure connection you can redirect by some port and include some encryption if your data must be classified.