Solaris 10 system hangs

Solaris 10 (Sun V210) System hangs every couple of months. Have to go into ALOM to reset. I did a consolehistory report and seen this in it.

Failed to exec inetd_start method of instance svc:/network/bootps/udp:default: I/O error
 
WARNING: /pci@1c,600000/scsi@2 (glm0):
        Resetting scsi bus, got incorrect phase from (0,0)
WARNING: /pci@1c,600000/scsi@2 (glm0):
        got SCSI bus reset
WARNING: /pci@1c,600000/scsi@2/sd@0,0 (sd3):
        auto request sense failed (reason=reset)

System also has a Business Policy Switch installed. I checked the logs and info in it and seen that the BPS power cycled 6 days ago. There is no information in the system (v210) that shows anything around the time the BPS power cycled.

Thanks,

please post the output of "iostat -eE".

Don't see any hard errors.

# iostat -Er
sd0       ,Soft Errors: 0 ,Hard Errors: 0 ,Transport Errors: 0
Vendor: SEAGATE  ,Product: ST373207LSUN72G  ,Revision: 0354 ,Serial No: 051931DV
30
Size: 73.40GB <73400057856 bytes>
,Media Error: 0 ,Device Not Ready: 0 ,No Device: 0 ,Recoverable: 0
Illegal Request: 0 ,Predictive Failure Analysis: 0
sd1       ,Soft Errors: 2 ,Hard Errors: 0 ,Transport Errors: 0
Vendor: TEAC     ,Product: DV-28E-N         ,Revision: 1.6A ,Serial No:
Size: 0.00GB <0 bytes>
,Media Error: 0 ,Device Not Ready: 0 ,No Device: 0 ,Recoverable: 0
Illegal Request: 2 ,Predictive Failure Analysis: 0
sd3       ,Soft Errors: 0 ,Hard Errors: 0 ,Transport Errors: 0
Vendor: FUJITSU  ,Product: MAT3073N SUN72G  ,Revision: 0602 ,Serial No: 0517B045
RY
Size: 73.40GB <73400057856 bytes>
,Media Error: 0 ,Device Not Ready: 0 ,No Device: 0 ,Recoverable: 0
Illegal Request: 0 ,Predictive Failure Analysis: 0
#

Looks an awful lot like this:

SUMMARY: E450 got stuck with fault in glm0