Small issue with Sun Sparc Enterprise T5120

Good Day,
We have bought Sun Sparc Enterprise T5120 with pre-installed Solaris 10 Sparc

But i need on this server Solaris 9. I have inserted in to DVD-rom (USB DVD-rom) with Solaris 9 for Sparc.

Then log into shell and type: reboot -- cdrom.
System rebooted and i have this message:

Boot device: /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/hub@4/device@4/storage@0/disk@0:f File and args:
boot: cannot open kernel/sparcv9/unix
Enter filename [kernel/sparcv9/unix]:

Is it possible to install Solaris 9 Sparc on T5120 ?

Thank you

T5120 is a solaris 10 only hardware.

but I think you can do a solaris 9 branded zone.

a good introduction is in this link.
The Solaris 8 Container & Solaris 9 Container

Ok,, Thx and I have another question. I have CD with Solaris 9. How can i install Solaris 9 in container (zone) from CD ?

---------- Post updated at 11:34 PM ---------- Previous update was at 11:23 PM ----------

Better to use:
zoneadm -z s9-zone install -x nodataset -d /cdrom/sol_9_905_sparc/s1/ -u
or
zoneadm -z s9-zone install -x nodataset -d /cdrom/sol_9_905_sparc/s1/ -p ?

---------- Post updated at 11:42 PM ---------- Previous update was at 11:34 PM ----------

Ok, I have tried install Solaris 9 from CD and got this:
# zoneadm -z s9-zone install -x nodataset -d /cdrom/sol_9_905_sparc/s1/ -u
Log File: /var/tmp/s9-zone.install.5186.log
Source: /cdrom/sol_9_905_sparc/s1/
Installing: This may take several minutes...
Postprocessing: This may take several minutes...
WARNING: zone did not finish booting.
Postprocess: ERROR: p2v module S40_setup_preload failed: 0
Postprocess: ERROR: Postprocessing failed.
Result: Postprocessing failed.

    Result: *** Installation FAILED \***
  Log File: /var/tmp/s9-zone.install.5186.log

[Tue Sep 29 10:33:18 KGT 2009] Log File: /var/tmp/s9-zone.install.5186.log
[Tue Sep 29 10:33:18 KGT 2009] Product: Solaris 9 Containers 1.0
[Tue Sep 29 10:33:18 KGT 2009] Installer: solaris9 brand installer 1.21
[Tue Sep 29 10:33:18 KGT 2009] Zone: s9-zone
[Tue Sep 29 10:33:18 KGT 2009] Path: /export/home/zone-s9
[Tue Sep 29 10:33:18 KGT 2009] Starting pre-installation tasks.
[Tue Sep 29 10:33:18 KGT 2009] Installation started for zone "s9-zone"
[Tue Sep 29 10:33:18 KGT 2009] Source: /cdrom/sol_9_905_sparc/s1/
[Tue Sep 29 10:33:18 KGT 2009] Media Type: directory
[Tue Sep 29 10:33:18 KGT 2009] Installing: This may take several minutes...
[Tue Sep 29 10:33:18 KGT 2009] cd "/cdrom/sol_9_905_sparc/s1/" && find a bin cdrom etc kernel lib mnt opt platform reconfigure sbin usr var webstart -xdev ( -type d -o -type f -o -type l ) -print | cpio -pdm "/export/home/zone-s9/root"
1065744 blocks
[Tue Sep 29 10:34:21 KGT 2009] Sanity Check: Passed. Looks like a Solaris 9 system.
[Tue Sep 29 10:34:21 KGT 2009] Postprocessing: This may take several minutes...
[Tue Sep 29 10:34:21 KGT 2009] running: p2v -u s9-zone
[Tue Sep 29 10:34:21 KGT 2009] Postprocess: Gathering information about zone s9-zone
[Tue Sep 29 10:34:22 KGT 2009] Postprocess: Creating mount points
[Tue Sep 29 10:34:22 KGT 2009] Postprocess: Linking in appropriate libc_psr.so for this platform
[Tue Sep 29 10:34:22 KGT 2009] Postprocess: Processing /etc/system
NOTICE: /etc/system directive 'set scsi_options=0x58';
is not applicable in the virtual environment.
NOTICE: /etc/system directive 'set scsi_reset_delay=10000';
is not applicable in the virtual environment.
NOTICE: /etc/system directive 'set tmpfs:tmpfs_minfree=1';
is not applicable in the virtual environment.
NOTICE: /etc/system directive 'set swapfs_minfree=0x040';
is not applicable in the virtual environment.
[Tue Sep 29 10:34:22 KGT 2009] Postprocess: Booting zone to single user mode
[Tue Sep 29 10:34:46 KGT 2009] Postprocess: Applying p2v module S20_apply_patches
[Tue Sep 29 04:34:47 GMT 2009] S20_apply_patches: Unpacking patch: 115986-03
[Tue Sep 29 04:34:47 GMT 2009] S20_apply_patches: Installing patch: 115986-03

mkdir: "/var/sadm/patch": No such file or directory
/usr/sbin/patchadd[6]: /var/sadm/pkg: not found
grep: can't open */pkginfo
grep: can't open */pkginfo
/usr/sbin/patchadd[3]: uid=0 gid=0(root): syntax error
mkdir: "/var/sadm/patch": No such file or directory
/usr/sbin/patchadd[7]: /var/sadm/patch: not found
Checking installed patches...
One or more patch packages included in
115986-03 are not installed on this system.

Patchadd is terminating.
[Tue Sep 29 04:34:48 GMT 2009] S20_apply_patches: Unpacking patch: 112963-32
[Tue Sep 29 04:34:48 GMT 2009] S20_apply_patches: Installing patch: 112963-32

mkdir: "/var/sadm/patch": No such file or directory
/usr/sbin/patchadd[6]: /var/sadm/pkg: not found
grep: can't open */pkginfo
grep: can't open */pkginfo
/usr/sbin/patchadd[3]: uid=0 gid=0(root): syntax error
mkdir: "/var/sadm/patch": No such file or directory
/usr/sbin/patchadd[7]: /var/sadm/patch: not found
Checking installed patches...
One or more patch packages included in
112963-32 are not installed on this system.

Patchadd is terminating.
[Tue Sep 29 10:34:51 KGT 2009] Postprocess: Applying p2v module S31_fix_net
[Tue Sep 29 10:34:51 KGT 2009] Postprocess: Applying p2v module S32_fix_nfs
[Tue Sep 29 10:34:51 KGT 2009] Postprocess: Applying p2v module S33_fix_vfstab
nawk: can't open file /etc/vfstab
source line number 19
[Tue Sep 29 10:34:51 KGT 2009] Postprocess: Applying p2v module S34_fix_inittab
[Tue Sep 29 10:34:52 KGT 2009] Postprocess: Applying p2v module S35_fix_crontab
nawk: can't open file /var/spool/cron/crontabs/root
source line number 18
[Tue Sep 29 10:34:52 KGT 2009] Postprocess: Applying p2v module S36_fix_pam_conf
[Tue Sep 29 10:34:52 KGT 2009] Postprocess: Applying p2v module S40_setup_preload
crle: /var/ld/ld.config: open failed: No such file or directory
[Tue Sep 29 10:34:52 KGT 2009] Postprocess: ERROR: p2v module S40_setup_preload failed: 0
[Tue Sep 29 10:34:52 KGT 2009] Postprocess: ERROR: Postprocessing failed.
[Tue Sep 29 10:34:52 KGT 2009] Result: Postprocessing failed.
[Tue Sep 29 10:34:52 KGT 2009]
[Tue Sep 29 10:34:52 KGT 2009] Result: *** Installation FAILED ***
[Tue Sep 29 10:34:52 KGT 2009] Log File: /var/tmp/s9-zone.install.5186.log

Then .. hmm how to install System from DVD ?

you need a brandZ zone. its the only way to deploy sol9 on this type of server. take a look at the previous post's link to this information.