Qlogic 10G Ethernet adapter not working

UNIX Solaris
1

Hi Community,

i have one issue with 10 fiber ethernet adapter.
here is my details:

root@new-bpel.example.com #dladm show-dev
bge0            link: unknown   speed: 0     Mbps       duplex: unknown
bge1            link: up        speed: 1000  Mbps       duplex: full
qlge2           link: down      speed: 10000 Mbps       duplex: full
qlge3           link: unknown   speed: 10000 Mbps       duplex: full

HBA Port WWN: 210000c0dd13c59f
        OS Device Name: /dev/cfg/c8
        Manufacturer: QLogic Corp.
        Model: QLE8142
        Firmware Version: 5.08.00
        FCode/BIOS Version:  BIOS: 2.14; fcode: 3.09; EFI: 3.20;
        Serial Number: RFC1001S62166
        Driver Name: qlc
        Driver Version: 141211-5.03
        Type: unknown
        State: offline
        Supported Speeds: 10Gb
        Current Speed: not established
        Node WWN: 200000c0dd13c59f

HBA Port WWN: 210000c0dd13c59d
        OS Device Name: /dev/cfg/c7
        Manufacturer: QLogic Corp.
        Model: QLE8142
        Firmware Version: 5.08.00
        FCode/BIOS Version:  BIOS: 2.14; fcode: 3.09; EFI: 3.20;
        Serial Number: RFC1001S62166
        Driver Name: qlc
        Driver Version: 141211-5.03
        Type: unknown
        State: offline
        Supported Speeds: 10Gb
        Current Speed: not established
        Node WWN: 200000c0dd13c59d

cfgadm -al is giving like it's connected:

c7                             fc           connected    unconfigured unknown
c8                             fc           connected    unconfigured unknown

i have installed latest patch : 149175-10

modules loaded too:

root@new-bpel.example.com #modinfo | egrep -ie "qlc|qlogic"
102 7b200000 2bf0d8 284   1  qlc (SunFC Qlogic FCA v141211-5.03)
134 7b72e000  1cf28 297   1  qlge (GLDv3 QLogic 81XX 140326-v1.18)

please help me to solve this issue

Regards,
Ben

---------- Post updated at 02:36 AM ---------- Previous update was at 12:12 AM ----------

This is what i am getting on /var/adm/messages

Jun  8 08:56:58 new-bpel.example.com last message repeated 1 time
Jun  8 09:01:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 09:06:58 new-bpel.example.com last message repeated 1 time
Jun  8 09:11:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 09:16:58 new-bpel.example.com last message repeated 1 time
Jun  8 09:21:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 09:26:58 new-bpel.example.com last message repeated 1 time
Jun  8 09:31:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 09:36:58 new-bpel.example.com last message repeated 1 time
Jun  8 09:41:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 09:46:58 new-bpel.example.com last message repeated 1 time
Jun  8 09:51:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 09:56:58 new-bpel.example.com last message repeated 1 time
Jun  8 10:01:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 10:06:58 new-bpel.example.com last message repeated 1 time
Jun  8 10:11:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(3) firmware version: 1.35.11
Jun  8 10:13:10 new-bpel.example.com last message repeated 1 time
Jun  8 10:21:58 new-bpel.example.com qlge: [ID 423879 kern.info] NOTICE: qlge(2) firmware version: 1.35.11
2

What is the hardware? Sparc or x86? What model?

Have you updated the boot code at all?

What FC switch is at the other end?

3

Solaris 10. sparc

Not server is physically migrated and reconfigured with

Reboot -- -rv -mverbose

Card: Qle 8142
Switch : brocade

4

So how did you install it? Boot code, driver, configuration, etc?

I have dealt the QLogic for many years and it is serious kit which is extremely well supported.

http://driverdownloads.qlogic.com/QLogicDriverDownloads_UI/SearchByOs.aspx?ProductCategory=39&OsCategory=5&Os=22&OsCategoryName=Solaris&ProductCategoryName=Fibre%20Channel%20Adapters&OSName=Solaris%20SPARC

The documentation here is comprehensive but generate a support ticket on this website if you have questions.

5

card is sun/oracle OEM, so qlogic is not supporting.

already downloaded and installed latest SunWqlcnic from support.oracle.com and it's loaded in modinfo through forceload on /etc/system.