I am trying to configuring jumpstart configuration. Please find below sysidcfg configuration file output
bash-3.2# cat sysidcfg
terminal=vt100
network_interface=nxge0 { primary hostname=sun1 ip_address=192.168.11.10 \
protocol_ipv6=no netmask=255.255.255.0 default_route=192.168.11.7}
timezone=Asia/Calcutta
nfs4_domain=dynamic
security_policy=NONE
keyboard=US-English
system_locale=en_US
timeserver=localhost
root_password='IiXxFy7eP8BdI'
name_service=NONE
security_policy=NONE
auto_reg=disable
Now when I booting from the client, it start asking question from "iSCSI Installation". I want to select "Install on non-iSCSI target". So please let me know what need to be added in sysidcfg file.
Please find below output.
SunOS Release 5.10 Version Generic_147147-26 64-bit
Copyright (c) 1983, 2013, Oracle and/or its affiliates. All rights reserved.
NOTICE: nxge0: xcvr addr:0x1d - link is up 1000 Mbps full duplex
Configuring devices.
Using RPC Bootparams for network configuration information.
Attempting to configure interface e1000g1...
NOTICE: nxge1: xcvr addr:0x1c - link is down
NOTICE: nxge2: xcvr addr:0x1b - link is down
NOTICE: nxge3: xcvr addr:0x1a - link is down
Skipped interface e1000g1
Attempting to configure interface e1000g0...
Skipped interface e1000g0
Attempting to configure interface nxge3...
Skipped interface nxge3
Attempting to configure interface nxge2...
Skipped interface nxge2
Attempting to configure interface nxge1...
Skipped interface nxge1
Attempting to configure interface nxge0...
Configured interface nxge0
USB keyboard
svc:/system/filesystem/local:default: WARNING: /usr/sbin/zfs mount -a failed: one or more file systems failed to mount
Setting up Java. Please wait...
Serial console, reverting to text install
Beginning system identification...
Searching for configuration file(s)...
Using sysid configuration file 10.240.21.104:/jumpstart/sysidcfg
Search complete.
Discovering additional network configuration...
Completing system identification...
Starting remote procedure call (RPC) services: done.
System identification complete.
Starting Solaris installation program...
Searching for JumpStart directory...
not found
Warning: Could not find matching rule in rules.ok
Press the return key for an interactive Solaris install program...
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
- The Solaris Installation Program ---------------------------------------------
The Solaris installation program is divided into a series of short sections
where you'll be prompted to provide information for the installation. At the
end of each section, you can change the selections you've made before
continuing.
About navigation...
- The mouse cannot be used
- If your keyboard does not have function keys, or they do not
respond, press ESC; the legend at the bottom of the screen
will change to show the ESC keys to use for navigation.
--------------------------------------------------------------------------------
F2_Continue F5_Exit F6_Help
- Solaris Interactive Installation ---------------------------------------------
On the following screens, you can accept the defaults or you can customize
how Solaris software will be installed by:
- Selecting the type of Solaris software to install
- Selecting disks to hold software you've selected
- Selecting unbundled products to be installed with Solaris
- Specifying how file systems are laid out on the disks
After completing these tasks, a summary of your selections (called a
profile) will be displayed.
There are two ways to install your Solaris software:
- "Standard" installs your system from a standard Solaris Distribution.
Selecting "Standard" allows you to choose between initial install
and upgrade, if your system is upgradable.
- "Flash" installs your system from one or more Flash Archives.
--------------------------------------------------------------------------------
Esc-2_Standard F3_Go Back Esc-4_Flash F5_Exit F6_Help
- iSCSI Installation -----------------------------------------------------------
Do you want to install Oracle Solaris 10 on an iSCSI target?
NOTE: You must have created the iSCSI target before beginning the OS
installation and the target system should be running Oracle Solaris 11 or
Solaris 10 U5 or greater.
If you choose to install the OS on a non-iSCSI target, you will be taken
directly to the Oracle Solaris 10 installation screens.
[X] Install on non-iSCSI target
[ ] Install on iSCSI target
--------------------------------------------------------------------------------
F2_Continue F3_Go Back F5_Exit
- Eject a CD/DVD Automatically? ------------------------------------------------
During the installation of Solaris software, you may be using one or more
CDs/DVDs. You can choose to have the system eject each CD/DVD automatically
after it is installed or you can choose to manually eject each CD/DVD.
[X] Automatically eject CD/DVD
[ ] Manually eject CD/DVD
--------------------------------------------------------------------------------
F2_Continue F3_Go Back F5_Exit
- Reboot After Installation? ---------------------------------------------------
After Solaris software is installed, the system must be rebooted. You can
choose to have the system automatically reboot, or you can choose to
manually reboot the system if you want to run scripts or do other
customizations before the reboot. You can manually reboot a system by using
the reboot(1M) command.
[X] Auto Reboot
[ ] Manual Reboot
--------------------------------------------------------------------------------
F2_Continue F3_Go Back F5_Exit
- Choose Media -----------------------------------------------------------------
Please specify the media from which you will install the Solaris Operating
System.
Media:
[ ] CD/DVD
[X] Network File System
--------------------------------------------------------------------------------
F2_Continue F3_Go Back F5_Exit
- Specify Network File System Path ---------------------------------------------
Please specify the path to the network file system from which you will
install the Solaris Operating System. Example:
NFS Location: server:/path_to_Solaris_image
============================================================================
NFS Location: 10.240.21.104:/export/install/
Please wait ...
--------------------------------------------------------------------------------
F2_Continue F3_Go Back
- Solaris Interactive Installation ---------------------------------------------
This system is upgradable, so there are two ways to install the Solaris
software.
The Upgrade option updates the Solaris software to the new release, saving
as many modifications to the previous version of Solaris software as
possible. Back up the system before using the Upgrade option.
The Initial option overwrites the system disks with the new version of
Solaris software. This option allows you to preserve any existing file
systems. Back up any modifications made to the previous version of Solaris
software before starting the Initial option.
After you select an option and complete the tasks that follow, a summary of
your actions will be displayed.
Please wait ...
--------------------------------------------------------------------------------
F2_Upgrade F3_Go Back F4_Initial F5_Exit F6_Help
- Initializing -----------------------------------------------------------------
The system is being initialized.
Loading install media, please wait...
- License ----------------------------------------------------------------------
You acknowledge that your use of this Oracle Solaris software product
is subject to (i) the license terms that you accepted when you obtained
the right to use Oracle Solaris software; or (ii) the license terms
that you agreed to when you placed your Oracle Solaris software order
with Oracle; or (iii) the Oracle Solaris software license terms
included with the hardware that you acquired from Oracle; or, if (i),
(ii) or (iii) are not applicable, then, (iv) the OTN License Agreement
for Oracle Solaris (which you acknowledge you have read and agree to)
available at
http://www.oracle.com/technetwork/licenses/
solaris-cluster-express-license-167852.html
Note: Software downloaded for trial use or downloaded as replacement
media may not be used to update any unsupported software.
--------------------------------------------------------------------------------
Esc-2_Accept License F5_Exit