Openswan with Cisco ASA

Applications IP Networking
1

Hi all,
I need this as soon as possible to solve it or at least to find out what is the problem.

I have configured IPSec tunnels with Openswan and Cisco ASA, i have established a connection and the ping was fine, but after some time there is request time out from both sites. I don't have ASA access but its default IPSec configuration,this is the openswan conf parameters.

#Define your IKE policy
            authby=secret
            keyingtries=0
            pfs=no
            ike=3des-sha1;modp1024
            ikelifetime="28800"
    
            dpddelay=0
            dpdtimeout=0
            dpdaction=clear
    
    #Define IPSec Policy
    
            phase2=esp
            phase2alg=3des-sha1
            ikev2=no
            keyexchange=ike
            rekey=no
            forceencaps=no
            keylife="28800"

I have found this in the "/var/log/seccure" logs

    received Delete SA(0x937bbc29) payload: deleting IPSEC State #5
    received and ignored informational message
    received Delete SA(0x55f62168) payload: deleting IPSEC State #8
    received and ignored informational message

Also i like to put some more logging/debuging so i can have more info but can't find any good example or doc. on how to.

And i have the following doc. on Phase 1 and 2

Encryption Algorithm     3DES
    Hash Algorithm           SHA1
    Authentication method    Preshare
    Diffie Hellman Group     Group 2
    Lifetime (Key)           28800
    Use NAT traversal        No
    Use PFS                  No
    Encapsulation            ESP
    Encryption Algorithm     3DES
    Hash Algorithm           SHA1
    Lifetime (Key)           28800

Any solution or hints or some parameters that I'm missing ?