Hi All,,
I had installed my solaris 10 over VMware and allocated 100 GB space. yet wehen i am installing weblogic. it says "no space left on device"
when i run df -k :-
------
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0d0s0 4864825 4779400 36777 100% /
/devices 0 0 0 0% /devices
ctfs 0 0 0 0% /system/contract
proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
swap 1295876 920 1294956 1% /etc/svc/volatile
objfs 0 0 0 0% /system/object
sharefs 0 0 0 0% /etc/dfs/sharetab
/usr/lib/libc/libc_hwcap1.so.1 4864825 4779400 36777 100% /lib/libc.so.1
fd 0 0 0 0% /dev/fd
swap 1295008 52 1294956 1% /tmp
swap 1294988 32 1294956 1% /var/run
/dev/dsk/c0d0s7 94717067 2577984 91191913 3% /export/home
/vol/dev/dsk/c1t0d0/vmwaretools 13060 13060 0 100% /cdrom/vmwaretools
---------
when i run iostat -E :-
+++++++
cmdk0 Soft Errors: 0 Hard Errors: 0 Transport Errors: 0
Model: VMware Virtual Revision: Serial No: 000000000000000 Size: 104.15GB <104151398400 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 0
sd0 Soft Errors: 10 Hard Errors: 0 Transport Errors: 0
Vendor: NECVMWar Product: VMware IDE CDR10 Revision: 1.00 Serial No:
Size: 0.01GB <13373440 bytes>
Media Error: 0 Device Not Ready: 0 No Device: 0 Recoverable: 0
Illegal Request: 10 Predictive Failure Analysis: 0
+++++
Can somebody pls help where m i going wrong.
sharad
root file system is 100%.. full .. i think you selected on autolayout while solaris installation
is there any way out now ???
---------- Post updated at 10:22 AM ---------- Previous update was at 10:15 AM ----------
actually i just did :-
#java -jar wlserver.jar -mode=console -log=/bea/logs/install.log
and while extracting file. i got the same error msg
---------- Post updated at 10:24 AM ---------- Previous update was at 10:22 AM ----------
do i need to install solaris again. if yes then how shud i do that..means which options to be selected. new to solaris 
---------- Post updated at 04:55 PM ---------- Previous update was at 10:24 AM ----------
can anybody help me on this pls....
I am not a Solaris expert, but some things even i can see. Actually there are two filesystems full:
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0d0s0 4864825 4779400 36777 100% /
/usr/lib/libc/libc_hwcap1.so.1 4864825 4779400 36777 100% /lib/libc.so.1
and you will probably have to free up some space in both of them. Reboot the system to make sure there are no processes writing in open files, then delete some files not absolutely necessary. Good places to start looking are /var/log , /var/tmp , etc..
What is even more rtoublesome is the following: you said you allocated 100GB disk space and:
/dev/dsk/c0d0s0 4864825 4779400 36777 100% /
/dev/dsk/c0d0s7 94717067 2577984 91191913 3% /export/home
It looks like you have allocated ~5GB to "/" and ~95GB to "/export/home". I don't know what "/export/home" should be (user data are usually in "/home"), but i doubt this is a sound layout. This filesystem is nearly empty (probably it is empty and the 3% are just inodes), so i'd back it up, remove it and recreate it, preferably smaller by an order of magnitude. The space freed this way you could probably use to increase "/" to a sensible value (no idea what you want to store in there, but if everything stays as it is 6-7GB would look fine).
I hope this helps.
bakunin
hi jain
you better reinstall soaris 10 ... coz you assigned your root file is only 5gb /100gb... for this your file is100% full frequently when some process are application ... so better goto reinstalll solaris ..
you create manual layout for solaris installation and allocate 25gb root
or better, reinstall the OS an select a ZFS root pool encompassing the whole disk.
couldn't he backup everything, repartition and then use something like ufsrestore? or would that be more time consuming anyway?
The quickest way would be to backup /export/home, reallocate s7 disk blocks to s0, move the swap if required, growfs / and restore /export/home.