network management port

UNIX Solaris
1

Hi I am using SF 240 and solaris 10 and I connected a cable to network management on server and other end to a switch.

What configurations do I need on server to ssh or telnet to the network management port from remotely ?

I also installed ALOM firmware. Is there anything else required on server or network side ?

Please let me know

Thanks

2

there are some basic settings for the alom network port. if you don't know this settings you have to use the serial port to connect to the machine and run "setupsc" to configure the ip settings of the network port.
if you have no serial line to your server and have solaris installed, you can also use the "scadm" command to configure the network management port.

please read:

#/usr/platform/`uname -i`/sbin/scadm help

3

Thanks

Is this correct ?

I am not able to connect when I do ssh 192.168.1.5

cable is connected from NM port to switch

GW is pingable. ( from the host itself )