Need to identlfy memory module

Hi,

Recently one of my server V490 showed memory issues on
"Fault_PC 0x10158dec Esynd 0x01e2 Slot A: J3001"

Below is the prtdiag info

========================= Memory Configuration ===============================
          Logical  Logical  Logical
     MC   Bank     Bank     Bank         DIMM    Interleave  Interleaved
Brd  ID   num      size     Status       Size    Factor      with
---  ---  ----     ------   -----------  ------  ----------  -----------
 A    0     0      2048MB   no_status    1024MB     8-way        0
 A    0     1      2048MB   no_status    1024MB     8-way        0
 A    0     2      2048MB   no_status    1024MB     8-way        0
 A    0     3      2048MB   no_status    1024MB     8-way        0
 A    2     0      2048MB   no_status    1024MB     8-way        0
 A    2     1      2048MB   no_status    1024MB     8-way        0
 A    2     2      2048MB   no_status    1024MB     8-way        0
 A    2     3      2048MB   no_status    1024MB     8-way        0
 B    1     0      2048MB   no_status    1024MB     8-way        1
 B    1     1      2048MB   no_status    1024MB     8-way        1
 B    1     2      2048MB   no_status    1024MB     8-way        1
 B    1     3      2048MB   no_status    1024MB     8-way        1
 B    3     0      2048MB   no_status    1024MB     8-way        1
 B    3     1      2048MB   no_status    1024MB     8-way        1
 B    3     2      2048MB   no_status    1024MB     8-way        1
 B    3     3      2048MB   no_status    1024MB     8-way        1

How to identify the module "Slot A: J3001" from the above output or Is there any other command to find the details. The server is in a remote location so i don't have a physical view either.

Thanks.

This is the one.
First group module

A 0 0 2048MB no_status 1024MB 8-way 0
A 0 1 2048MB no_status 1024MB 8-way 0
A 0 2 2048MB no_status 1024MB 8-way 0
A 0 3 2048MB no_status 1024MB 8-way 0
A 2 0 2048MB no_status 1024MB 8-way 0
A 2 1 2048MB no_status 1024MB 8-way 0
A 2 2 2048MB no_status 1024MB 8-way 0
A 2 3 2048MB no_status 1024MB 8-way 0
B 1 0 2048MB no_status 1024MB 8-way 1
B 1 1 2048MB no_status 1024MB 8-way 1
B 1 2 2048MB no_status 1024MB 8-way 1
B 1 3 2048MB no_status 1024MB 8-way 1
B 3 0 2048MB no_status 1024MB 8-way 1
B 3 1 2048MB no_status 1024MB 8-way 1
B 3 2 2048MB no_status 1024MB 8-way 1
B 3 3 2048MB no_status 1024MB 8-way 1

o.k that's gr8 ..

But please explain how to find ...i still can't relate Slot A: J3001 to

A 0 0 2048MB no_status 1024MB 8-way 0

A i understood what abt J3001

Thanks.

in group A0, its in the 1st Group. (There are total of 4 groups, group 1-4)
refer to the system board view

A quick question, are you a FE? If no, why are you concerned about that? The field engineer who is going to replace would know what to replace

incredible - he's dealing with an old EOL box. his support contract may not cover CE/FE work for EOL boxes. Such is the case with my contract.

Hi pupp, you are right to say that the box is EOL, not right to say that the system is not under contract. even the OP did not mention about this.
Btw, there are 100s and 1000s of people who are still using V490 servers with extended contract support up-to-date, in case you're not aware of

Thanks " incredible/pupp". :)

I am not an FE , i just wanted to know which exact hardware was going to be replaced. We are covered under support for these servers. The guys over the DC took care of it.