Hi,
I am running RHEL6 on a physical node (HP Proliant).
If it normal for the root device to get listed in the "multipath -ll" output? (Listed below as dm-4, HP LOGICAL VOLUME).
i.e.
asm-data (360a98000424a414b453f443548503644) dm-3 NETAPP,LUN
size=768G features='4 queue_if_no_path pg_init_retries 50 retain_attached_hw_handle' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=50 status=active
| |- 2:0:0:11 sdc 8:32 active ready running
| `- 3:0:0:11 sdd 8:48 active ready running
`-+- policy='round-robin 0' prio=10 status=enabled
|- 2:0:1:11 sdq 65:0 active ready running
`- 3:0:1:11 sdx 65:112 active ready running
mpatha (3600508b1001c5c8ef3f93243d9a1bd41) dm-4 HP,LOGICAL VOLUME
size=279G features='0' hwhandler='0' wp=rw
`-+- policy='round-robin 0' prio=1 status=active
`- 4:0:0:0 sdo 8:224 active ready running
backup01 (360a980004246534a342b44473966556e) dm-2 NETAPP,LUN
size=250G features='4 queue_if_no_path pg_init_retries 50 retain_attached_hw_handle' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=50 status=active
| |- 2:0:1:22 sds 65:32 active ready running
| `- 3:0:1:22 sdz 65:144 active ready running
`-+- policy='round-robin 0' prio=10 status=enabled
|- 3:0:0:22 sdh 8:112 active ready running
`- 2:0:0:22 sdg 8:96 active ready running
asm-log (360a98000424a414b453f443548503642) dm-0 NETAPP,LUN
size=256G features='3 pg_init_retries 50 retain_attached_hw_handler' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=50 status=active
| |- 2:0:0:10 sda 8:0 active ready running
| `- 3:0:0:10 sdb 8:16 active ready running
`-+- policy='round-robin 0' prio=10 status=enabled
|- 2:0:1:10 sdp 8:240 active ready running
`- 3:0:1:10 sdw 65:96 active ready running
Thanks,
D.