Hi All,
Need your help to explaining why when i configure 2 interface IPMP active-standby appear, INACTIVE and DEPRECATED parameter, detail screen shoot as below :
root@machine01 # ifconfig -a
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 7
inet 10.25.234.10 netmask ffffff00 broadcast 10.25.234.255
groupname mnic
ether 0:15:17:dc:ef:50
e1000g2: flags=69040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE> mtu 1500 index 8
inet 0.0.0.0 netmask ff000000
groupname mnic
ether 0:15:17:dc:ee:ce
please show your config files for the interfaces...
root@machine01 # more /etc/hostname.e1000g0
btrcm1 netmask + broadcast + group mnic up
root@machine01 # more /etc/hostname.e1000g2
group mnic deprecated -failover standby up
you are doing a mix of probe and link based ipmp. if you work with a deprecated interface, you need another address above your interfaces to switch between the interfaces. with link based ipmp you won't need that.
try this:
root@machine01 # more /etc/hostname.e1000g0
btrcm1 group mnic up
root@machine01 # more /etc/hostname.e1000g2
group mnic up
hi DukeNuke2,
it's mean i have to edit the /etc/hostname.e1000g0 and /etc/hostname.e1000g2
root@machine01 # more /etc/hostname.e1000g0
btrcm1 group mnic up
root@machine01 # more /etc/hostname.e1000g2
group mnic up
if this are your files... yes!
1 Like
I'll try this and I'll let you know the result.. thanks for the information...