hi, im completely new to bsd, but everything seems to work that bit better than under linux distros! im using pc-bsd, and need to get access to my sony ericsson k550i. i have a 2gig m2 card in it, and when the phone is switched off, it acts like a usb storage device apparently! it shows up in dmesg, n thats it!
my normal usb pen auto mounts, but my phone does nothing! i would apprecite some help with this if anyone even knows where i should start? or even has anyone acheived this already?? thanks
this is my relevant dmesg
cdce0: Sony Ericsson Sony Ericsson K550, rev 2.00/0.00, addr 2
cdce0: could not find data bulk in
device_attach: cdce0 attach returned 6
cdce0: at uhub1 port 2 (addr 2) disconnected
umass0: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 2
umass1: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
umass0: at uhub1 port 2 (addr 2) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
umass1: at uhub1 port 2 (addr 2) disconnected
(da1:umass-sim1:1:0:0): lost device
(da1:umass-sim1:1:0:0): removing device entry
umass1: detached
umass0: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 3
umass1: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 3
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 82MB (168000 512 byte sectors: 64H 32S/T 82C)
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: 1920MB (3934147 512 byte sectors: 255H 63S/T 244C)
umass0: at uhub0 port 2 (addr 3) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
umass1: at uhub0 port 2 (addr 3) disconnected
(da1:umass-sim1:1:0:0): lost device
(da1:umass-sim1:1:0:0): removing device entry
umass1: detached
cdce0: Sony Ericsson Sony Ericsson K550, rev 2.00/0.00, addr 3
cdce0: could not find data bulk in
device_attach: cdce0 attach returned 6
cdce0: at uhub0 port 2 (addr 3) disconnected
cdce0: Sony Ericsson Sony Ericsson K550, rev 2.00/0.00, addr 3
cdce0: could not find data bulk in
device_attach: cdce0 attach returned 6
cdce0: at uhub0 port 2 (addr 3) disconnected
umass0: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 3
umass1: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 3
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
umass0: at uhub0 port 2 (addr 3) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
umass1: at uhub0 port 2 (addr 3) disconnected
(da1:umass-sim1:1:0:0): lost device
(da1:umass-sim1:1:0:0): removing device entry
umass1: detached
umass0: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 3
umass1: Sony Ericsson Memory Stick, rev 2.00/0.00, addr 3
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
is that the same ? I see that the device is not being accepted for some reason, what happens if you turn the phone on ?
BTW, when I had PCBSD (v1.2) the command used to mount micro SD was : mount_msdosfs /dev/da0s1 /mnt/da0 - this were my disks at this time.
thank you so much!!!!
not very graceful wot happened tho! i ran
mount_msdosfs /dev/da1s1 /mnt/phone
the terminal said the action wasnt permited, then suddenly the whole system recognised it! pc-bsd opened a popup asking wot i wanted to do, i clicked open, and behold, the job was done!!!!
thanks again!