Hi Gurus,
Can anyone tell me the Hardware RAID configuration in HP Unix rp3440 model server containing HP UX B.11.11 OS version.
Thanks in Advance.
BR,
Prasanth
Hi Gurus,
Can anyone tell me the Hardware RAID configuration in HP Unix rp3440 model server containing HP UX B.11.11 OS version.
Thanks in Advance.
BR,
Prasanth
I dont know what you are talking of since an RP3440 is a small rack server, the hardware depends on what options you ordered: in standard it has a Dual channel Ultra160 SCSI controller and can hold 3 internal disks so it limits RAID choices dont you think?
Usually you would have 2 internal disks each on a separate channel for system purpose in mirror (RAID 1) and SAN Fiber channel HBAs for the rest...
Addendum...
You could use this command to see: Here its my RP5450...
ant:/home/vbe $ ioscan -funC ext_bus
Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
ext_bus 0 0/0/1/0 c720 CLAIMED INTERFACE SCSI C896 Fast Wide Single-Ended
ext_bus 1 0/0/1/1 c720 CLAIMED INTERFACE SCSI C896 Ultra Wide Single-Ended
ext_bus 2 0/0/2/0 c720 CLAIMED INTERFACE SCSI C87x Ultra Wide Single-Ended
ext_bus 3 0/0/2/1 c720 CLAIMED INTERFACE SCSI C87x Ultra Wide Single-Ended
ext_bus 6 0/4/0/0.1.17.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
ext_bus 12 0/4/0/0.1.196.0.0 fcparray CLAIMED INTERFACE FCP Array Interface
ext_bus 13 0/4/0/0.1.196.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
ext_bus 7 0/6/0/0 c720 CLAIMED INTERFACE SCSI C87x Fast Wide Differential
ext_bus 8 0/6/0/1 c720 CLAIMED INTERFACE SCSI C87x Fast Wide Differential
ext_bus 11 0/7/0/0.1.17.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
ext_bus 14 0/7/0/0.1.196.0.0 fcparray CLAIMED INTERFACE FCP Array Interface
ext_bus 15 0/7/0/0.1.196.255.0 fcpdev CLAIMED INTERFACE FCP Device Interface
Dear vbe,
Thanks for your reply. Actually iam a newbie to HP Unix.
Im sorry for double thread.
BR,
Prasanth
do an
ioscan -fnC Disk
Generally the 2 internal drives are mirrored for the OS installation,
We have had a couple different configurations of RAID drives for data, on an N74xx we had a SCSI RAID array using a 4SI RAID card, when the RAID reached ESOL, we migrated to HBA Cards and mounted disks from our SAN.
I would determine what cards you are using, the 3440 is a newer box, generally you would likely mount to a SAN, But have your internals for OS.
11.11 is an older release, I believe the RP is a PA/RISC, you might consider upgrading OS to 11.20 at some point.
It the 3440 is Itanium HP recommends 11.31
Personally I use the ITRC forums a lot when it comes to HP products, if you have specific questions, you should address them there.
http://h30499.www3.hp.com/t5/Community-Feedback-Suggestions/New-Forum-Locations-by-ITRC-Tree/td-p/4802433