In a Solaris9 environment I'm trying to restore flash archive (flar) with SVM mirrored devices to same server via jumpstart server and it is failing to create boot file and drops down to a command prompt in single user mode, metastat -i and metastat -p output looks good when compared to the ones before the restore, when I try to boot off the disk it says boot file not found, any help is very much appreciated 
Below is the console output where it is failing,
Installing boot information
- Installing boot blocks (c0t0d0s0)
- Updating system firmware for automatic rebooting
WARNING: Could not update system for automatic rebooting
Installation log location
- /a/var/sadm/system/logs/install_log (before reboot)
- /var/sadm/system/logs/install_log (after reboot)
Flash installation complete
- Creating SVM State Replica on disk c0t0d0s5
- Creating SVM State Replica on disk c0t0d0s6
- metadb: waiting on /etc/lvm/lock
- Creating SVM State Replica on disk c0t0d0s7
- Creating SVM State Replica on disk c0t2d0s5
- Creating SVM State Replica on disk c0t2d0s6
- Creating SVM State Replica on disk c0t2d0s7
- Creating SVM Mirror Volume d15 (/)
- Creating SVM Mirror Volume d25 (/var/log)
- Creating SVM Mirror Volume d35 (swap)
- Making SVM Mirror Volume as boot device (/dev/md/dsk/d15)
ERROR: Could not unmount /flars/test.flar:192.1.2.10
Executing JumpStart postinstall phase...
The begin script log 'begin.log'
is located in /var/sadm/system/logs after reboot.
#