Hi gurus, during playing movie via VLC or SMPlayer I get several time the error that file cannot be read. File was stored on external USB disk. During this error I get another dialogue message that says the new removable disk was connected..., just as if power goes off and on again or if I power on external disk. But I grep the logs and found some weird mesages (dmesg and /var/log/messages truncated outputs):
SMART returned this (tried options -d [ata|scsi|auto], but finally -d sat worked (because of issue with external disk or something simmilar)):
[pista@HP-PC ~]$ sudo smartctl -a -d sat /dev/sdc > /tmp/sdc
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.6.5-2.fc16.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda LP
Device Model: ST31500541AS
Serial Number: 6XW0QTZP
LU WWN Device Id: 5 000c50 01b8ed731
Firmware Version: CC34
User Capacity: 1,500,301,910,016 bytes [1.50 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sat Nov 10 23:26:01 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 643) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 369) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 106 099 006 Pre-fail Always - 10814541
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 482
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 067 060 030 Pre-fail Always - 6021470
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 805
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 138
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 001 000 Old_age Always - 1099532469790
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 062 046 045 Old_age Always - 38 (Min/Max 32/38)
194 Temperature_Celsius 0x0022 038 054 000 Old_age Always - 38 (0 18 0 0 0)
195 Hardware_ECC_Recovered 0x001a 051 048 000 Old_age Always - 10814541
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 49636937040786
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1096814074
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 700284568
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
dmesg
[ 232.010380] usb 1-4.4.4: new high-speed USB device number 6 using ehci_hcd
[ 232.096381] usb 1-4.4.4: New USB device found, idVendor=0930, idProduct=0b0d
[ 232.096388] usb 1-4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 232.096393] usb 1-4.4.4: Product: External HDD
[ 232.096398] usb 1-4.4.4: Manufacturer: TOSHIBA
[ 232.096402] usb 1-4.4.4: SerialNumber: 3658573051545A5020202020
[ 232.096744] scsi3 : usb-storage 1-4.4.4:1.0
[ 233.098691] scsi 3:0:0:0: Direct-Access TOSHIBA External HDD 1.04 PQ: 0 ANSI: 4
[ 233.099486] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 233.101163] sd 3:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 233.101646] sd 3:0:0:0: [sdc] Write Protect is off
[ 233.101650] sd 3:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 233.102161] sd 3:0:0:0: [sdc] No Caching mode page present
[ 233.102166] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 233.103896] sd 3:0:0:0: [sdc] No Caching mode page present
[ 233.103900] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 233.115071] sdc: sdc1 sdc2
[ 233.118397] sd 3:0:0:0: [sdc] No Caching mode page present
[ 233.118402] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 233.118405] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 5633.491311] Buffer I/O error on device sdc1, logical block 111199025
[ 7042.230654] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.234749] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.238888] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.243001] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.247134] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.247143] hub 1-4.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 7042.251275] hub 1-4.4:1.0: cannot disable port 4 (err = -71)
[ 7042.255394] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.271914] hub 1-4.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 7042.276023] hub 1-4.4:1.0: cannot disable port 4 (err = -71)
[ 7042.280148] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.296652] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.296661] hub 1-4.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 7042.300758] hub 1-4.4:1.0: cannot disable port 4 (err = -71)
[ 7042.304897] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.309003] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.313131] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.317273] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.321397] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
[ 7042.321405] hub 1-4.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
[ 7042.359179] end_request: I/O error, dev sdd, sector 1015133831
[ 7042.359188] Buffer I/O error on device sdd1, logical block 126891721
[ 7042.359198] Buffer I/O error on device sdd1, logical block 126891722
[ 7042.359238] Buffer I/O error on device sdd1, logical block 126891729
[ 7042.359132] sd 4:0:0:0: [sdd] Unhandled error code
[ 7042.359142] sd 4:0:0:0: [sdd]
[ 7042.359147] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[ 7042.359153] sd 4:0:0:0: [sdd] CDB:
/var/log/messages
Nov 10 14:40:34 HP-PC kernel: [ 232.010380] usb 1-4.4.4: new high-speed USB device number 6 using ehci_hcd
Nov 10 14:40:34 HP-PC kernel: [ 232.096381] usb 1-4.4.4: New USB device found, idVendor=0930, idProduct=0b0d
Nov 10 14:40:34 HP-PC kernel: [ 232.096388] usb 1-4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 10 14:40:34 HP-PC kernel: [ 232.096393] usb 1-4.4.4: Product: External HDD
Nov 10 14:40:34 HP-PC kernel: [ 232.096398] usb 1-4.4.4: Manufacturer: TOSHIBA
Nov 10 14:40:34 HP-PC kernel: [ 232.096402] usb 1-4.4.4: SerialNumber: 3658573051545A5020202020
Nov 10 14:40:34 HP-PC kernel: [ 232.096744] scsi3 : usb-storage 1-4.4.4:1.0
Nov 10 14:40:34 HP-PC mtp-probe: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/1-4.4.4"
Nov 10 14:40:34 HP-PC mtp-probe: bus: 1, device: 6 was not an MTP device
Nov 10 14:40:35 HP-PC kernel: [ 233.098691] scsi 3:0:0:0: Direct-Access TOSHIBA External HDD 1.04 PQ: 0 ANSI: 4
Nov 10 14:40:35 HP-PC kernel: [ 233.099486] sd 3:0:0:0: Attached scsi generic sg3 type 0
Nov 10 14:40:35 HP-PC kernel: [ 233.101163] sd 3:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
Nov 10 14:40:35 HP-PC kernel: [ 233.101646] sd 3:0:0:0: [sdc] Write Protect is off
Nov 10 14:40:35 HP-PC kernel: [ 233.102161] sd 3:0:0:0: [sdc] No Caching mode page present
Nov 10 14:40:35 HP-PC kernel: [ 233.102166] sd 3:0:0:0: [sdc] Assuming drive cache: write through
Nov 10 14:40:35 HP-PC kernel: [ 233.103896] sd 3:0:0:0: [sdc] No Caching mode page present
Nov 10 14:40:35 HP-PC kernel: [ 233.103900] sd 3:0:0:0: [sdc] Assuming drive cache: write through
Nov 10 14:40:35 HP-PC kernel: [ 233.115071] sdc: sdc1 sdc2
Nov 10 14:40:35 HP-PC kernel: [ 233.118397] sd 3:0:0:0: [sdc] No Caching mode page present
Nov 10 14:40:35 HP-PC kernel: [ 233.118402] sd 3:0:0:0: [sdc] Assuming drive cache: write through
Nov 10 14:40:35 HP-PC kernel: [ 233.118405] sd 3:0:0:0: [sdc] Attached SCSI disk
Nov 10 14:40:38 HP-PC ntfs-3g[2323]: Version 2011.4.12 integrated FUSE 27
Nov 10 14:40:38 HP-PC ntfs-3g[2323]: Mounted /dev/sdc2 (Read-Write, label "1TB_02", NTFS 3.1)
Nov 10 14:40:38 HP-PC ntfs-3g[2323]: Cmdline options: rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,dmask=0077,fmask=0177
Nov 10 14:40:38 HP-PC ntfs-3g[2323]: Mount options: rw,nosuid,nodev,uhelper=udisks,allow_other,nonempty,atime,fsname=/dev/sdc2,blkdev,blksize=4096,default_permissions
Nov 10 14:40:38 HP-PC ntfs-3g[2323]: Global ownership and permissions enforced, configuration type 1
Nov 10 14:40:38 HP-PC ntfs-3g[2328]: Version 2011.4.12 integrated FUSE 27
Nov 10 14:40:38 HP-PC ntfs-3g[2328]: Mounted /dev/sdc1 (Read-Write, label "1TB_01", NTFS 3.1)
Nov 10 14:40:38 HP-PC ntfs-3g[2328]: Cmdline options: rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,dmask=0077,fmask=0177
Nov 10 14:40:38 HP-PC ntfs-3g[2328]: Mount options: rw,nosuid,nodev,uhelper=udisks,allow_other,nonempty,atime,fsname=/dev/sdc1,blkdev,blksize=4096,default_permissions
Nov 10 14:40:38 HP-PC ntfs-3g[2328]: Global ownership and permissions enforced, configuration type 1
Nov 10 14:40:40 HP-PC yum[2283]: Installed: smplayer-0.8.1-1.fc16.x86_64
Nov 10 14:40:40 HP-PC dbus[1004]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Nov 10 14:40:40 HP-PC dbus-daemon[1004]: dbus[1004]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Nov 10 14:40:41 HP-PC dbus[1004]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Nov 10 14:40:41 HP-PC dbus-daemon[1004]: dbus[1004]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Nov 10 14:49:01 HP-PC chronyd[1000]: Selected source 193.87.160.18
Nov 10 15:12:45 HP-PC chronyd[1000]: Selected source 158.195.19.4
Nov 10 15:34:40 HP-PC kernel: [ 3477.504136] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
Nov 10 15:34:40 HP-PC kernel: [ 3477.508233] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
Nov 10 15:34:40 HP-PC kernel: [ 3477.512355] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
Nov 10 15:34:40 HP-PC kernel: [ 3477.516486] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
Nov 10 15:34:40 HP-PC kernel: [ 3477.519806] hub 1-4:1.0: port 4 disabled by hub (EMI?), re-enabling...
Nov 10 15:34:40 HP-PC kernel: [ 3477.519971] usb 1-4.4: USB disconnect, device number 5
Nov 10 15:34:40 HP-PC kernel: [ 3477.519977] usb 1-4.4.4: USB disconnect, device number 6
Nov 10 15:34:40 HP-PC kernel: [ 3477.520596] hub 1-4.4:1.0: cannot reset port 4 (err = -71)
Nov 10 15:34:40 HP-PC kernel: [ 3477.520602] hub 1-4.4:1.0: Cannot enable port 4. Maybe the USB cable is bad?
Nov 10 15:34:40 HP-PC kernel: [ 3477.520607] hub 1-4.4:1.0: cannot disable port 4 (err = -19)
Nov 10 15:34:40 HP-PC kernel: [ 3477.520614] hub 1-4.4:1.0: cannot reset port 4 (err = -19)
Nov 10 15:34:40 HP-PC kernel: [ 3477.520619] hub 1-4.4:1.0: cannot disable port 4 (err = -19)
Nov 10 15:34:40 HP-PC kernel: [ 3477.520624] hub 1-4.4:1.0: cannot disable port 4 (err = -19)
Nov 10 15:34:40 HP-PC kernel: [ 3477.521478] sd 3:0:0:0: [sdc] Unhandled error code
Nov 10 15:34:40 HP-PC kernel: [ 3477.521481] sd 3:0:0:0: [sdc]
Nov 10 15:34:40 HP-PC kernel: [ 3477.521484] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
Nov 10 15:34:40 HP-PC kernel: [ 3477.521486] sd 3:0:0:0: [sdc] CDB:
Nov 10 15:34:40 HP-PC kernel: [ 3477.521487] Read(10): 28 00 34 a9 df 47 00 00 f0 00
Nov 10 15:34:40 HP-PC kernel: [ 3477.521496] end_request: I/O error, dev sdc, sector 883547975
Nov 10 15:34:40 HP-PC kernel: [ 3477.521499] Buffer I/O error on device sdc1, logical block 110443489
Nov 10 15:34:40 HP-PC kernel: [ 3477.521502] Buffer I/O error on device sdc1, logical block 110443490
Nov 10 15:34:40 HP-PC kernel: [ 3477.521543] sd 3:0:0:0: [sdc] Unhandled error code
Nov 10 15:34:40 HP-PC kernel: [ 3477.521545] sd 3:0:0:0: [sdc]
Nov 10 15:34:40 HP-PC kernel: [ 3477.521546] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
Nov 10 15:34:40 HP-PC kernel: [ 3477.521548] sd 3:0:0:0: [sdc] CDB:
Nov 10 15:34:40 HP-PC kernel: [ 3477.521549] Read(10): 28 00 34 a9 e0 37 00 00 10 00
Nov 10 15:34:40 HP-PC kernel: [ 3477.521556] end_request: I/O error, dev sdc, sector 883548215
Nov 10 15:34:40 HP-PC kernel: [ 3477.734242] usb 1-4.4: new high-speed USB device number 7 using ehci_hcd
Nov 10 15:34:40 HP-PC kernel: [ 3477.809490] usb 1-4.4: New USB device found, idVendor=05e3, idProduct=0608
Nov 10 15:34:40 HP-PC kernel: [ 3477.809495] usb 1-4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Nov 10 15:34:40 HP-PC kernel: [ 3477.809498] usb 1-4.4: Product: USB2.0 Hub
Nov 10 15:34:40 HP-PC kernel: [ 3477.810057] hub 1-4.4:1.0: USB hub found
Nov 10 15:34:40 HP-PC kernel: [ 3477.810344] hub 1-4.4:1.0: 4 ports detected
Nov 10 15:34:40 HP-PC ntfs-3g[2323]: Unmounting /dev/sdc2 (1TB_02)
Nov 10 15:34:40 HP-PC kernel: [ 3478.077385] usb 1-4.4.4: new high-speed USB device number 8 using ehci_hcd
Nov 10 15:34:40 HP-PC kernel: [ 3478.163377] usb 1-4.4.4: New USB device found, idVendor=0930, idProduct=0b0d
Nov 10 15:34:40 HP-PC kernel: [ 3478.163382] usb 1-4.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 10 15:34:40 HP-PC kernel: [ 3478.163385] usb 1-4.4.4: Product: External HDD
Nov 10 15:34:40 HP-PC kernel: [ 3478.163387] usb 1-4.4.4: Manufacturer: TOSHIBA
Nov 10 15:34:40 HP-PC kernel: [ 3478.163390] usb 1-4.4.4: SerialNumber: 3658573051545A5020202020
Nov 10 15:34:40 HP-PC kernel: [ 3478.164980] scsi4 : usb-storage 1-4.4.4:1.0
Nov 10 15:34:40 HP-PC mtp-probe: checking bus 1, device 8: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/1-4.4.4"
Nov 10 15:34:40 HP-PC mtp-probe: bus: 1, device: 8 was not an MTP device
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread error reading '/MULTIMEDIA/!!! videa/Serialy/Mentalista/Mentalista 03-09 Rud� ms�c.avi' at offset 104722432: 131072 <> -1: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread error reading '/MULTIMEDIA/!!! videa/Serialy/Mentalista/Mentalista 03-09 Rud� ms�c.avi' at offset 104853504: 131072 <> -1: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread error reading '/MULTIMEDIA/!!! videa/Serialy/Mentalista/Mentalista 03-09 Rud� ms�c.avi' at offset 104722432: 4096 <> -1: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread error reading '/MULTIMEDIA/!!! videa/Serialy/Mentalista/Mentalista 03-09 Rud� ms�c.avi' at offset 104722432: 4096 <> -1: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread error reading '/MULTIMEDIA/!!! videa/Serialy/Mentalista/Mentalista 03-09 Rud� ms�c.avi' at offset 104722432: 4096 <> -1: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread error reading '/MULTIMEDIA/!!! videa/Serialy/Mentalista/Mentalista 03-09 Rud� ms�c.avi' at offset 104738816: 4096 <> -1: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread error reading '/MULTIMEDIA/!!! videa/Serialy/Mentalista/Mentalista 03-09 Rud� ms�c.avi' at offset 104738816: 4096 <> -1: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread error reading '/MULTIMEDIA/!!! videa/Serialy/Mentalista/Mentalista 03-09 Rud� ms�c.avi' at offset 104738816: 4096 <> -1: Input/output error
Nov 10 15:34:41 HP-PC kernel: [ 3479.170484] scsi 4:0:0:0: Direct-Access TOSHIBA External HDD 1.04 PQ: 0 ANSI: 4
Nov 10 15:34:41 HP-PC kernel: [ 3479.171962] sd 4:0:0:0: Attached scsi generic sg3 type 0
Nov 10 15:34:41 HP-PC kernel: [ 3479.172585] sd 4:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
Nov 10 15:34:41 HP-PC kernel: [ 3479.173177] sd 4:0:0:0: [sdd] Write Protect is off
Nov 10 15:34:41 HP-PC kernel: [ 3479.173698] sd 4:0:0:0: [sdd] No Caching mode page present
Nov 10 15:34:41 HP-PC kernel: [ 3479.173707] sd 4:0:0:0: [sdd] Assuming drive cache: write through
Nov 10 15:34:41 HP-PC kernel: [ 3479.175545] sd 4:0:0:0: [sdd] No Caching mode page present
Nov 10 15:34:41 HP-PC kernel: [ 3479.175549] sd 4:0:0:0: [sdd] Assuming drive cache: write through
Nov 10 15:34:41 HP-PC kernel: [ 3479.185833] sdd: sdd1 sdd2
Nov 10 15:34:41 HP-PC kernel: [ 3479.187920] sd 4:0:0:0: [sdd] No Caching mode page present
Nov 10 15:34:41 HP-PC kernel: [ 3479.187926] sd 4:0:0:0: [sdd] Assuming drive cache: write through
Nov 10 15:34:41 HP-PC kernel: [ 3479.187931] sd 4:0:0:0: [sdd] Attached SCSI disk
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread_i: ntfs_pread failed: Input/output error
Nov 10 15:34:41 HP-PC ntfs-3g[2328]: ntfs_attr_pread error reading '/MULTIMEDIA/!!! videa/Serialy/Mentalista/Mentalista 03-09 Rud� ms�c.avi' at offset 104738816:
CONFIGURATION
[pista@HP-PC vpn_tuke]$ sudo cat /var/log/messages | grep smart
[pista@HP-PC vpn_tuke]$ sudo dmesg | grep -i smart
[pista@HP-PC vpn_tuke]$ uname -a && cat /proc/version && cat /etc/issue
Linux HP-PC 3.6.5-2.fc16.x86_64 #1 SMP Thu Nov 1 03:49:27 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Linux version 3.6.5-2.fc16.x86_64 (mockbuild@bkernel02) (gcc version 4.6.3 20120306 (Red Hat 4.6.3-2) (GCC) ) #1 SMP Thu Nov 1 03:49:27 UTC 2012
Fedora release 16 (Verne)
Kernel \r on an \m (\l)
[pista@HP-PC vpn_tuke]$ cat /proc/cpuinfo | grep "model name"
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
What could be wrong ? Is it only power supply issue that hard disk is flapping or NTFS error or the wors case the damege of hard disk blocks ? Thank you very much