Whenever I assign/unassign a CDROM ( RAID CTRL ) to Active LPAR from HMC, I have to reboot the LPAR.
How can I do it without rebooting the LPARS.
POWER6 with HMC
LPARS = AIX 6.1
Any info
developerWorks : AIX and UNIX : PowerVM Forum : Moving CD-ROM/DVD-ROM dynamically ...
But doesn't answer the question.... some info though...
IBM VIO WIKI IBM Developer
Dynamic LPAR tips and checklists for RMC authentication and authorization
developerWorks
Level: Introductory
Truc Nguyen (truc@us.ibm.com), HMC Software Developer, IBM
10 Feb 2005
This article provides dynamic LPAR tips for Resource Monitoring and Control \(RMC\) authentication and authorization. The author includes a checklist for DLPAR setup, and information about setting up the HMC/partitions hostname and network. The appendixes provide information gathered from the field about RMC/DLPAR.
http://www.ibm.com/developerworks/eserver/articles/DLPARchecklist.html
Someone told me that if the LPARs can ping the HMC then it is possible to move the CDROM ( RAID Controller ) from LPAR to another LPAR. using DLPAR feature or HMC profile ADD AS DESIRED..
Should the HMC and the managed server have static IP or DHCP will also work ??
1) I made the RAID Controller ( Which has the CDROM + 2 Physical Disks )
" As Desired " when assigning it to the LPAR
2) Restart the LPAR
( I shouldn't restart the LPAR. It should detect it with cfgmgr )
3) Unassign the cdrom, ( raid controller ) from HMC
4) restart the LPAR from where it was unassigned
5) Restart the LPAR to where it is assigned
---
This should happen without restarting...
On the other forums. there are other ways to do it.
remove the pci / cdrom device
see here: http://unix.ittoolbox.com/groups/technical-functional/ibm-aix-l/moving-cdrom-from-an-lpar-to-another-2682927?cv=expanded
http://aixulagam.blogspot.com/2009/03/hmc-tips-v-dlpar-operations.html
thanks
After making sure that HMC - LPARs are DLPAR capable by going through this document
Dynamic LPAR tips and checklists for RMC authentication and authorization
It works.
Basically HMC should be able to ping all the LPARS and vice-versa.
Hostname from LPARs and HMC should be resolvable.
HMC daemons should be running in the LPARs.
then it will work.
For the record:
The DLPAR checklist you refer to is for power4 machines and none of the host name or host resolution checks applies to power 5 or 6 because the rsct / rmc daemons only use ip addresses in p5 and p6 machines.
In p4 things were very different because the hmc used host names only and the system connection to the service processor was a serial link not an ip link.
This is a better link for p5/6 dlpar problems:
IBM - The most common reasons for failures with Dynamic Logical Partitioning
HTH
Removing the CD ROM from DLPAR and assigning it to another LPAR
On the LPAR find out where the CD-ROM is assigned:
# lsdev -Cc cdrom
cd0 Available 03-08-00 SATA DVD-ROM Drive
# lsdev -Cl cd0 -F parent
sata0
# lsdev -Cl sata0 -F parent
sissas0
# lsslot -c slot
# Slot Description Device(s)
HEA 17 Logical I/O Slot lhea1 ent0
U789D.001.DQD52DG-P1-T1 Logical I/O Slot pci4 usbhc2 usbhc3
U789D.001.DQD52DG-P1-T3 Logical I/O Slot pci3 sissas0
U9117.MMA.6534BE4-V4-C0 Virtual I/O Slot vsa0
U9117.MMA.6534BE4-V4-C4 Virtual I/O Slot vscsi0
U9117.MMA.6534BE4-V4-C8 Virtual I/O Slot vscsi1
U9117.MMA.6534BE4-V4-C22 Virtual I/O Slot vscsi3
U9117.MMA.6534BE4-V4-C24 Virtual I/O Slot vscsi4
# lsdev -Cc cdrom -F "name physloc"
cd0 U789D.001.DQD52DG-P4-D1
Then from HMC -- go to --> Dynamically Logical Partitioning --> Physical Adapters --> Remove
Remove the controller and then assign to another partition.
Also: the other way
# lsdev -Cc cdrom
cd0 Available 03-08-00 SATA DVD-ROM Drive
# lsdev -C | grep 03-08-00
cd0 Available 03-08-00 SATA DVD-ROM Drive
hdisk5 Available 03-08-00 SAS Disk Drive
hdisk6 Available 03-08-00 SAS Disk Drive
sas0 Available 03-08-00 Controller SAS Protocol
sata0 Available 03-08-00 Controller SATA Protocol
ses0 Available 03-08-00 SAS Enclosure Services Device
ses1 Available 03-08-00 SAS Enclosure Services Device
ses2 Available 03-08-00 SAS Enclosure Services Device
# lscfg
INSTALLED RESOURCE LIST
The following resources are installed on the machine.
+/- = Added or deleted from Resource List.
Model Architecture: chrp
Model Implementation: Multiple Processor, PCI bus
+ sys0 System Object
+ sysplanar0 System Planar