iam traying to install o/s in spark machine it showing error
ok >boot cdrom
is showing error
short disk read
failed to read superblock
the file just loaded does not appear to excutable
how to solve this can u help me
have you check the media , i mean your CD doesn't seems to be bootable, if you have any bootserver may be you can give a try or the other option is getting the new iso image from sun
cdrom problem
Is it enough just to say "boot cdrom"? Do you not also have to update the boot-device parameter in the prom?
From the Solaris 10 reference:
The boot PROM determines the boot device by reading the PROM parameter boot-device.
The boot PROM reads the disk label located at Sector 0 on the default boot device.
The boot PROM finds the boot program from the default boot device
programmed into the PROM.
Its a cd/dvd rom issue in your case.
I hit another problem today with my system, as follows:-
{0} ok boot /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom@0,0:f -sw
Boot device: /pci@7c0/pci@0/pci@1/pci@0/ide@8/cdrom@0,0:f File and args: -sw
Can't read disk label.
Can't open disk label package
ERROR: /pci@780/pci@0/pci@9/scsi@0: boot-read fail
Can't open boot device
In this case it seemed to be a fault dvd drive. No matter what cd/dvd I used to boot from and reseat the ide cable, Im not even able to probe the dvd drive.
boot cdrom will initiate to boot the OS installation program, fyi
the problem for the above which I posted was resolved. Netra T2000 has some known bugs for dvd not getting recognized. Upgraded the firmware to 6.7.0 and it worked.
thanks for incredible