Cannot get my Sun Solaris servers to log into Brocade Switch

UNIX Solaris
1

Cannot get my Sun Solaris servers to log into a Brocade 5100. All fiber has been connected correctly and all drivers and firmware are loaded and up to date according to EMCGrab report. Below is an output from server. Please Help:
HBA Port WWN: 2100001b321063c4
OS Device Name: /dev/cfg/c3
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.01.00
FCode/BIOS Version: BIOS: 1.24; fcode: 1.26; EFI: 1.8;
Serial Number: 0402R00-0809504720
Driver Name: qlc
Driver Version: 20090519-2.31
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: not established
Node WWN: 2000001b321063c4
HBA Port WWN: 2101001b323063c4
OS Device Name: /dev/cfg/c4
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.01.00
FCode/BIOS Version: BIOS: 1.24; fcode: 1.26; EFI: 1.8;
Serial Number: 0402R00-0809504720
Driver Name: qlc
Driver Version: 20090519-2.31
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: not established
Node WWN: 2001001b323063c4

2

Hello,

I dont know well but i think u should check if your brocade switch has any zone configuration if so maybe u need to use system fc port's wwn

3

first try to tip in to your brocade. make sure the IP , admin password etc is set
point your browser to
http://<ip_address>