I am trying to run apcupsd, but it will not retain contact the UPS
root@meow:/home/ethan/UPS/gapcmon-0.8.9# /etc/init.d/apcupsd start
Starting UPS power management:
A copy of the daemon is still running. If you just stopped it,
please wait about 5 seconds for it to shut down.
root@meow:/home/ethan/UPS/gapcmon-0.8.9# /etc/init.d/apcupsd stop
Stopping UPS power management: apcupsd.
root@meow:/home/ethan/UPS/gapcmon-0.8.9# /etc/init.d/apcupsd start
Starting UPS power management: apcupsd.
root@meow:/home/ethan/UPS/gapcmon-0.8.9# apcaccess status
APC : 001,017,0435
DATE : 2014-11-13 22:26:39 -0500
HOSTNAME : meow
VERSION : 3.14.12 (29 March 2014) debian
CABLE : Custom Cable Smart
DRIVER : APC Smart UPS (any)
UPSMODE : Stand Alone
STARTTIME: 2014-11-13 22:26:36 -0500
STATUS : COMMLOST
MBATTCHG : 5 Percent
MINTIMEL : 3 Minutes
MAXTIME : 0 Seconds
NUMXFERS : 0
TONBATT : 0 Seconds
CUMONBATT: 0 Seconds
XOFFBATT : N/A
STATFLAG : 0x05000100
END APC : 2014-11-13 22:26:39 -0500
Broadcast Message from ethan@meow
(somewhere) at 22:27 ...
Warning communications lost with UPS