Hi everyone.I have an Audigy2 ZS sound card. I'm not a guru so don't send me faraway)) Well my card sounds only in front channels... can't setup 5.1.
and i can't made a microphone works.
PS: A have red this Yuriy Tsibizov (AKA chibis) many time.
Here is some system info
dmesg
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #1: Fri Oct 24 20:29:23 UTC 2008
levenson@:/usr/src/sys/i386/compile/CUSTOM-24-10-2008
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (2999.98-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf65 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR,PDCM>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1610219520 (1535 MB)
avail memory = 1559957504 (1487 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A_M_I_ OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - C7, should be C2 [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU1._OSC] (Node 0xc4bed980), AE_ALREADY_EXISTS
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU1._PDC] (Node 0xc4bed9a0), AE_ALREADY_EXISTS
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU2._OSC] (Node 0xc4bed860), AE_ALREADY_EXISTS
ACPI Error (psparse-0626): Method parse/execution failed [\\_PR_.CPU2._PDC] (Node 0xc4bed880), AE_ALREADY_EXISTS
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci3: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe800-0xe87f mem 0xdf000000-0xdfffffff,0xe0000000-0xefffffff,0xdc000000-0xddffffff irq 16 at device 0.0 on pci3
nvidia0: <GeForce 8600 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
uhci0: <UHCI (generic) USB controller> port 0x9000-0x901f irq 20 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x9400-0x941f irq 17 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x9800-0x981f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xa000-0xa01f irq 19 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xdbeffc00-0xdbefffff irq 20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib3
skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xc000-0xc0ff mem 0xdbff4000-0xdbff7fff irq 17 at device 0.0 on pci1
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:1c:f0:98:36:f4
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
skc0: [ITHREAD]
emu10kx0: <Creative Audigy 2 ZS [SB0350]> port 0xc400-0xc43f irq 21 at device 1.0 on pci1
emu10kx0: [ITHREAD]
pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0
pcm2: <EMU10Kx DSP center PCM interface> on emu10kx0
pcm3: <EMU10Kx DSP subwoofer PCM interface> on emu10kx0
pcm4: <EMU10Kx DSP side PCM interface> on emu10kx0
fwohci0: <1394 Open Host Controller Interface> mem 0xdbfff800-0xdbffffff,0xdbff8000-0xdbffbfff irq 22 at device 1.2 on pci1
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:41:02:97:bc
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:02:97:bc
fwe0: Ethernet address: 02:02:3c:02:97:bc
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:02:3c:01:41:02:97:bc @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x189c000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port 0xb800-0xb807,0xb400-0xb403,0xb000-0xb007,0xa800-0xa803,0xa400-0xa40f irq 23 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model MouseMan+, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
ad0: 76319MB <Seagate ST380011A 3.06> at ata0-master UDMA100
ad1: 238475MB <Seagate ST3250823A 3.03> at ata0-slave UDMA100
ad5: 238475MB <Seagate ST3250823AS 3.01> at ata2-slave SATA150
ad6: 190782MB <Seagate ST3200822AS 3.01> at ata3-master SATA150
ad7: 190782MB <Seagate ST3200822AS 3.01> at ata3-slave SATA150
GEOM_LABEL: Label for provider ad1s1 is ntfs/Cinema3.
GEOM_LABEL: Label for provider ad5s1 is ntfs/For Users.
GEOM_LABEL: Label for provider ad6s1 is ntfs/Cinema2.
GEOM_LABEL: Label for provider ad7s1 is ntfs/Cinema1.
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
WARNING: /home was not properly dismounted
/home: mount pending error: blocks 1472 files 7
WARNING: /tmp was not properly dismounted
/tmp: mount pending error: blocks 0 files 1
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
GEOM_LABEL: Label ntfs/For Users removed.
GEOM_LABEL: Label ntfs/Cinema1 removed.
GEOM_LABEL: Label ntfs/Cinema2 removed.
GEOM_LABEL: Label ntfs/Cinema3 removed.
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1395 used static ldt allocation.
See the i386_set_ldt man page for more info
pid 9254 (totem-video-thumbna), uid 1001: exited on signal 11 (core dumped)
pid 18773 (totem-video-thumbna), uid 1001: exited on signal 11 (core dumped)
pid 55840 (totem-video-thumbna), uid 1001: exited on signal 11 (core dumped)
NVRM: Xid (0003:00): 13, 0004 00000000 00008297 000015f0 04840480 00000100
NVRM: Xid (0003:00): 13, 0005 00000000 00008297 00001530 00000001 00000100
NVRM: Xid (0003:00): 13, 0005 00000000 00008297 00001530 00000001 00000100
NVRM: Xid (0003:00): 13, 0005 00000000 00008297 00000f04 00000000 00000100
NVRM: Xid (0003:00): 13, 0005 00000000 00008297 00000f04 00000000 00000100
NVRM: Xid (0003:00): 13, 0005 00000000 00005039 00000100 00000000 00000002
NVRM: Xid (0003:00): 13, 0005 00000000 00008297 000015e0 00000000 00000100
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
GEOM_LABEL: Label for provider ad6s1 is ntfs/Cinema2.
GEOM_LABEL: Label for provider ad7s1 is ntfs/Cinema1.
GEOM_LABEL: Label for provider ad1s1 is ntfs/Cinema3.
GEOM_LABEL: Label for provider ad5s1 is ntfs/For Users.
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 2 2 0 0 done
All buffers synced.
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #1: Fri Oct 24 20:29:23 UTC 2008
levenson@:/usr/src/sys/i386/compile/CUSTOM-24-10-2008
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (2999.98-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf65 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe49d<SSE3,RSVD2,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR,PDCM>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1610219520 (1535 MB)
avail memory = 1559957504 (1487 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 5ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - C7, should be C2 [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci3: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe800-0xe87f mem 0xdf000000-0xdfffffff,0xe0000000-0xefffffff,0xdc000000-0xddffffff irq 16 at device 0.0 on pci3
nvidia0: <GeForce 8600 GT> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
uhci0: <UHCI (generic) USB controller> port 0x9000-0x901f irq 20 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x9400-0x941f irq 17 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x9800-0x981f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xa000-0xa01f irq 19 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xdbeffc00-0xdbefffff irq 20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib3
skc0: <D-Link DGE-530T Gigabit Ethernet> port 0xc000-0xc0ff mem 0xdbff4000-0xdbff7fff irq 17 at device 0.0 on pci1
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:1c:f0:98:36:f4
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
skc0: [ITHREAD]
emu10kx0: <Creative Audigy 2 ZS [SB0350]> port 0xc400-0xc43f irq 21 at device 1.0 on pci1
emu10kx0: [ITHREAD]
pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0
pcm2: <EMU10Kx DSP center PCM interface> on emu10kx0
pcm3: <EMU10Kx DSP subwoofer PCM interface> on emu10kx0
pcm4: <EMU10Kx DSP side PCM interface> on emu10kx0
fwohci0: <1394 Open Host Controller Interface> mem 0xdbfff800-0xdbffffff,0xdbff8000-0xdbffbfff irq 22 at device 1.2 on pci1
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:41:02:97:bc
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:02:97:bc
fwe0: Ethernet address: 02:02:3c:02:97:bc
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:02:3c:01:41:02:97:bc @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x189c000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port 0xb800-0xb807,0xb400-0xb403,0xb000-0xb007,0xa800-0xa803,0xa400-0xa40f irq 23 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model MouseMan+, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
ad0: 76319MB <Seagate ST380011A 3.06> at ata0-master UDMA100
ad1: 238475MB <Seagate ST3250823A 3.03> at ata0-slave UDMA100
ad5: 238475MB <Seagate ST3250823AS 3.01> at ata2-slave SATA150
ad6: 190782MB <Seagate ST3200822AS 3.01> at ata3-master SATA150
ad7: 190782MB <Seagate ST3200822AS 3.01> at ata3-slave SATA150
GEOM_LABEL: Label for provider ad1s1 is ntfs/Cinema3.
GEOM_LABEL: Label for provider ad5s1 is ntfs/For Users.
GEOM_LABEL: Label for provider ad6s1 is ntfs/Cinema2.
GEOM_LABEL: Label for provider ad7s1 is ntfs/Cinema1.
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s2a
IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
pciconf -l -v
hostb0@pci0:0:0:0: class=0x060000 card=0x817a1043 chip=0x27708086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82945G/GZ/P/PL Host Bridge/DRAM Controller'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x00008086 chip=0x27718086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82945G/GZ/P/PL Host to PCI Express Bridge'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:0: class=0x060400 card=0x81791043 chip=0x27d08086 rev=0x01 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:29:0: class=0x0c0300 card=0x81791043 chip=0x27c88086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x81791043 chip=0x27c98086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x81791043 chip=0x27ca8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci3@pci0:0:29:3: class=0x0c0300 card=0x81791043 chip=0x27cb8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:29:7: class=0x0c0320 card=0x81791043 chip=0x27cc8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib3@pci0:0:30:0: class=0x060401 card=0x81791043 chip=0x244e8086 rev=0xe1 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x81791043 chip=0x27b88086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '945GL Intel 82801GB/GR (ICH7 Family) LPC Interface Controller - 27B8'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:1: class=0x01018a card=0x81791043 chip=0x27df8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) Ultra ATA Storage Controller'
class = mass storage
subclass = ATA
atapci1@pci0:0:31:2: class=0x01018f card=0x26011043 chip=0x27c08086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller'
class = mass storage
subclass = ATA
none0@pci0:0:31:3: class=0x0c0500 card=0x81791043 chip=0x27da8086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) SMBus Controller'
class = serial bus
subclass = SMBus
vgapci0@pci0:3:0:0: class=0x030000 card=0x601219da chip=0x040210de rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
device = 'GeForce 8600 GT'
class = display
subclass = VGA
skc0@pci0:1:0:0: class=0x020000 card=0x4b011186 chip=0x4b011186 rev=0x11 hdr=0x00
vendor = 'D-Link System Inc'
device = 'DGE-530T V.B1 Gigabit Ethernet Adapter (rev 11)'
class = network
subclass = ethernet
emu10kx0@pci0:1:1:0: class=0x040100 card=0x20011102 chip=0x00041102 rev=0x04 hdr=0x00
vendor = 'Creative Technology LTD.'
device = 'Creative SB Audigy 2 ZS (WDM) Audigy Audio Processor'
class = multimedia
subclass = audio
emujoy0@pci0:1:1:1: class=0x098000 card=0x00401102 chip=0x70031102 rev=0x04 hdr=0x00
vendor = 'Creative Technology LTD.'
device = 'EMU10K2 Creative Labs SB Audigy MIDI/Game port'
class = input device
fwohci0@pci0:1:1:2: class=0x0c0010 card=0x00101102 chip=0x40011102 rev=0x04 hdr=0x00
vendor = 'Creative Technology LTD.'
device = 'EMU10K1 Audigy IEEE1394a Firewire Controller'
class = serial bus
subclass = FireWire
kldstat
Id Refs Address Size Name
1 14 0xc0400000 58ad84 kernel
2 1 0xc098b000 75592c nvidia.ko
3 2 0xc10e1000 28658 linux.ko
4 1 0xc110a000 6a32c acpi.ko
5 1 0xc51fb000 36000 ipl.ko
6 2 0xc5468000 7d000 osscore.ko
7 1 0xc54ee000 16000 sblive.ko
8 1 0xc56ae000 e000 fuse.ko
cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 32bit 2007061600/i386)
Installed devices:
pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0 [MPSAFE] (4p:1v/1r:1v channels duplex default)
pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0 [MPSAFE] (1p:1v/0r:0v channels)
pcm2: <EMU10Kx DSP center PCM interface> on emu10kx0 [MPSAFE] (1p:1v/0r:0v channels)
pcm3: <EMU10Kx DSP subwoofer PCM interface> on emu10kx0 [MPSAFE] (1p:1v/0r:0v channels)
pcm4: <EMU10Kx DSP side PCM interface> on emu10kx0 [MPSAFE] (1p:1v/0r:0v channels)
mixer
mixer: SOUND_MIXER_READ_DEVMASK: Device not configured