Is there any way to know the L2 cache size from examinging to boot log. Here is my boot log
Linux version 2.6.13-jaluna (root@localhost.localdomain) (gcc version 3.2.2) #4
Thu Apr 23 23:16:10 EDT 2009
TMS320DM643X port (C) VirtualLogix and others
Designed for the EVMDM6437 board, Spectrum Digital Inc.
CPU: C64x+ revision unknown core voltage 1.2V core number 0
Initializing kernel
Zone DMA start=0x83000000 size=0x1000000
disabling caching for 0x83000000 to 0x83ffffff
zone : 8029a438, size 4096
zone 0 start 16384, 80300800 802a0800
zone : 8029a56c, size 12288
zone 1 start 12288, 802a0800 802a0800
zone : 8029a6a0, size 0
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=/dev/nfs rw nfsroot=169.254.29.75
:/home/mourya/Install/linux-root,auto_uid ip=169.254.29.76:::::eth0: video=dm64
xxfb:output=pal
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory available: 62208k/62864k RAM, 0k/0k ROM (596k kernel code, 51k data)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
EVMDM6437: Unable to read MAC from EEPROM, no i2c support in kernel.
eth0: EMAC driver version 0.12 IRQ=10 ZERO_COPY=ON
eth0: Ethernet addr=00:00:00:00:00:00 PHY=MII
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 7) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
eth1: REMETH driver v0.21: error=no device found
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
IP-Config: Guessing netmask 255.255.0.0
IP-Config: Complete:
device=eth0, addr=169.254.29.76, mask=255.255.0.0, gw=255.255.255.255,
host=169.254.29.76, domain=, nis-domain=(none),
bootserver=255.255.255.255, rootserver=169.254.29.75, rootpath=
Looking up port of RPC 100003/2 on 169.254.29.75
Looking up port of RPC 100005/1 on 169.254.29.75