Can't PowerOn M3000 - Bad Data CRC

UNIX Solaris
1

Hi, I was working on the M3000 and I did a init 0, powered off the system during the weekend. When I tried to poweron today, the XSCF linux boot image keeps on rebooting and does not go to the login for XSCF access. The "Check" LED is on amber. Tried diagnosing but cant get the system up. Any help will do.

...............finish
    DDR Real size: 256 MB
    DDR: 224 MB

## Booting image at ff800000 ...
   Image Name:   XSCF kernel 01080001 2.6.11.12-s
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1456856 Bytes =  1.4 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ff980000 ...
   Image Name:   XSCF rootfs 01080004 ,2009/01/08
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    5454338 Bytes =  5.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... Bad Data CRC
XSCF uboot  01080000  (Sep 26 2008 - 09:31:29)


XSCF uboot  01080000  (Sep 26 2008 - 09:31:29)

SCF board boot factor = 4080
memory test ..
Memory compare test
................finish
    DDR Real size: 256 MB
    DDR: 224 MB

## Booting image at ff800000 ...
   Image Name:   XSCF kernel 01080001 2.6.11.12-s
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1456856 Bytes =  1.4 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ff980000 ...
   Image Name:   XSCF rootfs 01080004 ,2009/01/08
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    5454338 Bytes =  5.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... Bad Data CRC
XSCF uboot  01080000  (Sep 26 2008 - 09:31:29)


XSCF uboot  01080000  (Sep 26 2008 - 09:31:29)

SCF board boot factor = 4080
memory test ..
Memory compare test
................finish
    DDR Real size: 256 MB
    DDR: 224 MB

## Booting image at ff800000 ...
   Image Name:   XSCF kernel 01080001 2.6.11.12-s
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1456856 Bytes =  1.4 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ff980000 ...
   Image Name:   XSCF rootfs 01080004 ,2009/01/08
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    5454338 Bytes =  5.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... Bad Data CRC
XSCF uboot  01080000  (Sep 26 2008 - 09:31:29)


XSCF uboot  01080000  (Sep 26 2008 - 09:31:29)

SCF board boot factor = 4080
memory test ..
Memory compare test
................finish
    DDR Real size: 256 MB
    DDR: 224 MB

## Booting image at ff800000 ...
   Image Name:   XSCF kernel 01080001 2.6.11.12-s
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1456856 Bytes =  1.4 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ff980000 ...
   Image Name:   XSCF rootfs 01080004 ,2009/01/08
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    5454338 Bytes =  5.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ...
2

It seems that the XSCF is dead. For M3000, the XSCF does not come as a separate unit and it is an integrated part of the system board. Need to replace the system board to overcome this