What is MB/CMP0/PCI_MEZZ/BR0-FUNC ?

Hello,
I have a T5220 server, which is out of support from Oracle support now. Recently I had to reboot it and I am noticing a part failure in its boot logs. Though it comes on login prompt, but I am not able to find,what this part is and if I leave it like this, can it impact anything ? It is mezzanine PCI card, but if it is disabled, what is its use ?

0:1:0>ERROR: TEST = PIU PCI id test
0:1:0>H/W under test = MB/CMP0/PCI_MEZZ/BR0-FUNC
0:1:0>Repair Instructions: Replace items in order listed by 'H/W under test' above.
0:1:0>MSG =     PCI ID test device missing  Cont.
                DEVICE NAME: MB/CMP0/PCI_MEZZ/BR0-FUNC
0:1:0>END_ERROR
------------------
2018-12-04 20:51:10.789 0:1:0>ERROR:
2018-12-04 20:51:10.842 0:1:0>  POST toplevel status has the following failures:
2018-12-04 20:51:10.898 0:1:0>  I/O ----------------------------------
2018-12-04 20:51:10.953 0:1:0>          MB/CMP0/PCI_MEZZ/BR0-FUNC
2018-12-04 20:51:11.007 0:1:0>END_ERROR

2018-12-04 20:51:11.061 0:1:0>POST:     Return to VBSC.
2018-12-04 20:51:11.114 0:1:0>Master set ACK for vbsc runpost command and spin...
cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu cpu Device: pci
Device: niu
----------
ERROR: The following devices are disabled:
    MB/PCI_MEZZ/PCIE-IO

{8} ok

Please advice.

Thanks

Hi,

This is the Mezzanine card which plugs into the motherboard and has all the PCI slots on it, any faults would manifest on any I/O cards that you have installed in the slots - additional network, HBA's or GBIP cards.

Info can be found in the manual here.

Regards

Gull04

1 Like