Hi all,
I just add in new cpu/memory module into SFV480 and unable to see new module on slot B. I already try many way like only 1 new module and swap the both module and boot up but still unable to see it.
If I only install the module into slot B, then the server is unbootable at all.
I already change one new centerplane but still the same.
The error show below.
Desired Safari Bus speed 150MHz, selecting 150MHz
Configuring CPUs..........
... CPU0 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==> CPU 900MHz
Ecache 8MB 3.3ns mode=3-3-3 2-way ECCR: 0000.0000.0309.4400
... CPU2 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==> CPU 900MHz
Ecache 8MB 3.3ns mode=3-3-3 2-way ECCR: 0000.0000.0309.4400 ...Done
Setting system speed (and resetting)...
<*>
Set Speed Reset
@(#)OBP 4.6.8 2002/09/04 13:45 Sun Fire 480R
Front Panel Keyswitch is in Diagnostic position.
Online: CPU0 Ultra-III+ (v2.2) 6:1 900MHz 8MB 3:1 ECache
Online: *CPU2 Ultra-III+ (v2.2) 6:1 900MHz 8MB 3:1 ECache
Executing Power On SelfTest w/%o0 = 0000.0000.0001.4042
0>Scan ring integrity
0>INFO: H/W under test = CPU Board Slot B (Cheetah 1, DCDS [0-7], SRAMs) Scan Ri
ng NOT Present or Shut OFF
0>INFO: H/W under test = CPU Board Slot B (Cheetah 3, SRAMs) Scan Ring NOT Prese
nt or Shut OFF
Already upgrade to latest OBP version.
Any idea pls help.
Thanks...