Hi All,
Could anyone please help to resolve the below problem.
I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error.
[code#ifup eth0
e100 device eth0 does not seem to be present, delaying initialization.[/CODE]
I spent 2 days for the above and go through with several suggestion found by googling. But no luck.
Please help me.
Below are the some command & result which i executed on my machine.
[root@localhost ~]# ls /sys/class/net show
ls: show: No such file or directory
/sys/class/net:
lo sit0
[root@localhost ~]# lspci -vv | grep -i net
00:19.0 Ethernet controller: Intel Corporation Unknown device 1503 (rev 05)
[root@localhost ~]# dmesg | grep eth
You have mail in /var/spool/mail/root
[root@localhost ~]#
[root@localhost ~]# uname -a
Linux localhost.localdomain 2.6.18-194.el5PAE #1 SMP Tue Mar 16 22:00:21 EDT 2010 i686 i686 i386 GNU/Linux
[root@localhost ~]# lspci | grep -i eth
00:19.0 Ethernet controller: Intel Corporation Unknown device 1503 (rev 05)
[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corporation Unknown device 0100 (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation Unknown device 1503 (rev 05)
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5)
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation Unknown device 1c5c (rev 05)
00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05)
01:00.0 PCI bridge: Integrated Technology Express, Inc. Unknown device 8892 (rev 30)
[root@localhost ~]# lspci -nnk
lspci: invalid option -- k
Usage: lspci [<switches>]
-v Be verbose
-n Show numeric ID's
-b Bus-centric view (PCI addresses and IRQ's instead of those seen by the CPU)
-x Show hex-dump of the standard portion of config space
-xxx Show hex-dump of the whole config space (dangerous; root only)
-xxxx Show hex-dump of the 4096-byte extended config space (root only)
-s [[[[<domain>]:]<bus>]:][<slot>][.[<func>]] Show only devices in selected slots
-d [<vendor>]:[<device>] Show only selected devices
-t Show bus tree
-m Produce machine-readable output
-i <file> Use specified ID database instead of /usr/share/hwdata/pci.ids
-D Always show domain numbers
-M Enable `bus mapping' mode (dangerous; root only)
-P <dir> Use specified directory instead of /proc/bus/pci
-H <mode> Use direct hardware access (<mode> = 1 or 2)
-F <file> Read configuration data from given file
-G Enable PCI access debugging
This version is modified by Red Hat, so that it also takes all
/usr/share/hwdata/pci.ids.d/*.ids files into account.
[root@localhost ~]# modinfo e1000 | grep ver
filename: /lib/modules/2.6.18-194.el5PAE/kernel/drivers/net/e1000/e1000.ko
version: 7.3.21-k4-NAPI
description: Intel(R) PRO/1000 Network Driver
srcversion: 67E2ABDFF545441B7EAE560
vermagic: 2.6.18-194.el5PAE SMP mod_unload 686 REGPARM 4KSTACKS gcc-4.1
parm: AutoNeg:Advertised auto-negotiation setting (array of int)
[root@localhost ~]#
[root@localhost ~]# lsmod
Module Size Used by
e1000 119253 0
vfat 15937 1
fat 51165 1 vfat
nls_utf8 6209 1
autofs4 29253 3
hidp 23105 2
rfcomm 42457 0
l2cap 29505 10 hidp,rfcomm
bluetooth 53925 5 hidp,rfcomm,l2cap
lockd 63337 0
sunrpc 146685 2 lockd
cpufreq_ondemand 12493 4
acpi_cpufreq 13897 0
loop 18761 0
dm_multipath 25421 0
scsi_dh 12097 1 dm_multipath
video 21193 0
backlight 10049 1 video
sbs 18533 0
power_meter 16461 0
hwmon 7364 1 power_meter
i2c_ec 9025 1 sbs
i2c_core 24001 1 i2c_ec
dell_wmi 8401 0
wmi 12137 1 dell_wmi
button 10705 0
battery 13637 0
asus_acpi 19289 0
ac 9157 0
ipv6 270305 20
xfrm_nalgo 13381 1 ipv6
crypto_api 12609 1 xfrm_nalgo
lp 15849 0
sr_mod 19941 1
cdrom 36577 1 sr_mod
parport_pc 29157 1
sg 36573 0
parport 37513 2 lp,parport_pc
usb_storage 81057 1
serio_raw 10693 0
pcspkr 7105 0
dm_raid45 67145 0
dm_message 6977 1 dm_raid45
dm_region_hash 15681 1 dm_raid45
dm_mem_cache 9537 1 dm_raid45
dm_snapshot 23141 0
dm_zero 6209 0
dm_mirror 24393 0
dm_log 14657 3 dm_raid45,dm_region_hash,dm_mirror
dm_mod 63225 11 dm_multipath,dm_raid45,dm_snapshot,dm_zero,dm_mirror,dm_log
ahci 35145 3
libata 157445 1 ahci
sd_mod 25281 5
scsi_mod 141973 6 scsi_dh,sr_mod,sg,usb_storage,libata,sd_mod
ext3 125513 2
jbd 57321 1 ext3
uhci_hcd 25549 0
ohci_hcd 25193 0
ehci_hcd 34125 0
[root@localhost ~]# modprobe e1000
[root@localhost ~]# dmesg
Linux version 2.6.18-194.el5PAE (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Tue Mar 16 22:00:21 EDT 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
BIOS-e820: 0000000040200000 - 00000000da94c000 (usable)
BIOS-e820: 00000000da94c000 - 00000000da997000 (ACPI NVS)
BIOS-e820: 00000000da997000 - 00000000da99f000 (ACPI data)
BIOS-e820: 00000000da99f000 - 00000000dabbc000 (reserved)
BIOS-e820: 00000000dabbc000 - 00000000dabbd000 (usable)
BIOS-e820: 00000000dabbd000 - 00000000dabcd000 (reserved)
BIOS-e820: 00000000dabcd000 - 00000000dabdb000 (ACPI NVS)
BIOS-e820: 00000000dabdb000 - 00000000dac02000 (reserved)
BIOS-e820: 00000000dac02000 - 00000000dac45000 (ACPI NVS)
BIOS-e820: 00000000dac45000 - 00000000dae80000 (reserved)
BIOS-e820: 00000000dae80000 - 00000000db000000 (usable)
BIOS-e820: 00000000db800000 - 00000000dfa00000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000021f600000 (usable)
7798MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fcdf0
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
NX (Execute Disable) protection: active
On node 0 totalpages: 2225664
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 1996288 pages, LIFO batch:31
DMI 2.6 present.
Using APIC driver default
ACPI: RSDP (v002 INTEL ) @ 0x000f0450
ACPI: XSDT (v001 INTEL DH61ZE 0x00000034 AMI 0x00010013) @ 0xda997068
ACPI: FADT (v004 INTEL DH61ZE 0x00000034 AMI 0x00010013) @ 0xda99e318
ACPI: MADT (v003 INTEL DH61ZE 0x00000034 AMI 0x00010013) @ 0xda99e410
ACPI: SSDT (v001 INTEL DH61ZE 0x00000001 MSFT 0x03000001) @ 0xda99e488
ACPI: MCFG (v001 INTEL DH61ZE 0x00000034 MSFT 0x00000097) @ 0xda99e590
ACPI: HPET (v001 INTEL DH61ZE 0x00000034 AMI. 0x00000004) @ 0xda99e5d0
ACPI: DSDT (v002 INTEL DH61ZE 0x00000012 INTL 0x20051117) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2 6:10 APIC version 21
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:10 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3 6:10 APIC version 21
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a701 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e0000000 (gap: dfa00000:1f31c000)
Detected 3292.873 MHz processor.
Built 1 zonelists. Total pages: 2225664
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0765000 soft=c0745000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 8207864k/8902656k available (2175k kernel code, 77896k reserved, 898k data, 228k init, 7371572k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 64-bit timers, 14318180 Hz
Using HPET for base-timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.74 BogoMIPS (lpj=3292873)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 28100000 00000000 02000000 159ae3bf 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 28100000 00000000 02000000 159ae3bf 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 28100000 00000000 03000940 159ae3bf 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 11000
CPU 1 irqstacks, hard=c0766000 soft=c0746000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6585.00 BogoMIPS (lpj=3292504)
CPU: After generic identify, caps: bfebfbff 28100000 00000000 02000000 159ae3bf 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 28100000 00000000 02000000 159ae3bf 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 28100000 00000000 03000940 159ae3bf 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 2/2 eip 11000
CPU 2 irqstacks, hard=c0767000 soft=c0747000
Initializing CPU#2
Calibrating delay using timer specific routine.. 6584.97 BogoMIPS (lpj=3292489)
CPU: After generic identify, caps: bfebfbff 28100000 00000000 02000000 159ae3bf 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 28100000 00000000 02000000 159ae3bf 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 28100000 00000000 03000940 159ae3bf 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz stepping 07
SMP alternatives: switching to SMP code
Booting processor 3/3 eip 11000
CPU 3 irqstacks, hard=c0768000 soft=c0748000
Initializing CPU#3
Calibrating delay using timer specific routine.. 6584.94 BogoMIPS (lpj=3292470)
CPU: After generic identify, caps: bfebfbff 28100000 00000000 02000000 159ae3bf 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 28100000 00000000 02000000 159ae3bf 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 3072K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 28100000 00000000 03000940 159ae3bf 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz stepping 07
Total of 4 processors activated (26340.67 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Using local APIC timer interrupts.
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
sizeof(vma)=88 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=176 bytes
migration_cost=33,59
checking if image is initramfs... it is
Freeing initrd memory: 3208k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.BR21._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:02: ioport range 0x290-0x29f has been reserved
pnp: 00:02: ioport range 0x778-0x77f has been reserved
pnp: 00:0b: ioport range 0x400-0x453 could not be reserved
pnp: 00:0b: ioport range 0x458-0x47f has been reserved
pnp: 00:0b: ioport range 0x1180-0x119f has been reserved
pnp: 00:0b: ioport range 0x500-0x57f has been reserved
pnp: 00:0c: ioport range 0x454-0x457 has been reserved
PCI: Bridge: 0000:01:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:01:00.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1360262792.843:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 1E1FA4939F6A6293
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ AMI] OemTableId [ IST] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CST] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 1 throttling states)
ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU2] (supports 1 throttling states)
ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU3] (supports 1 throttling states)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 408k
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1a.0 to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1a.0
ehci_hcd 0000:00:1a.0: irq 177, io mem 0xfe427000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1d.0
ehci_hcd 0000:00:1d.0: irq 201, io mem 0xfe426000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 19 (level, low) -> IRQ 209
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
usb 1-1.1: new low speed USB device using ehci_hcd and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
input: Logitech USB Optical Mouse as /class/input/input1
input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.1
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x30 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425300 irq 217
ata6: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425380 irq 217
usb 2-1.1: new high speed USB device using ehci_hcd and address 3
usb 2-1.1: configuration #1 chosen from 1 choice
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: ST3500641AS, 3.AGM, max UDMA/133
ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6.00: ATAPI: TSSTcorp CDDVDW SH-222AB, ID01, max UDMA/100, ATAPI AN
ata6.00: configured for UDMA/100
Vendor: ATA Model: ST3500641AS Rev: 3.AG
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 4:0:0:0: Attached scsi disk sda
Vendor: TSSTcorp Model: CDDVDW SH-222AB Rev: ID01
Type: CD-ROM ANSI SCSI revision: 05
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1360262816.969:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input2
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
sd 4:0:0:0: Attached scsi generic sg0 type 0
scsi 5:0:0:0: Attached scsi generic sg1 type 5
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
Vendor: MBIL-SSM Model: SWIVEL Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdb: 7827456 512-byte hdwr sectors (4008 MB)
sdb: Write Protect is off
sdb: Mode Sense: 23 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 7827456 512-byte hdwr sectors (4008 MB)
sdb: Write Protect is off
sdb: Mode Sense: 23 00 00 00
sdb: assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: Attached scsi removable disk sdb
sd 6:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
floppy0: no floppy controllers found
lp0: using parport0 (interrupt-driven).
lp0: console ready
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
mtrr: type mismatch for e3fe0000,10000 old: write-back new: write-combining
mtrr: type mismatch for e3fc0000,20000 old: write-back new: write-combining
mtrr: type mismatch for e3f80000,40000 old: write-back new: write-combining
mtrr: type mismatch for e3f00000,80000 old: write-back new: write-combining
mtrr: type mismatch for e3e00000,100000 old: write-back new: write-combining
mtrr: type mismatch for e3c00000,200000 old: write-back new: write-combining
mtrr: type mismatch for e3800000,400000 old: write-back new: write-combining
mtrr: type mismatch for e3000000,800000 old: write-back new: write-combining
mtrr: type mismatch for e2000000,1000000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,2000000 old: write-back new: write-combining
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
loop: loaded (max 8 devices)
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 5603320k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:5603320k
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
Intel(R) PRO/1000 Network Driver - version 7.3.21-k4-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
mtrr: type mismatch for e3fe0000,10000 old: write-back new: write-combining
mtrr: type mismatch for e3fc0000,20000 old: write-back new: write-combining
mtrr: type mismatch for e3f80000,40000 old: write-back new: write-combining
mtrr: type mismatch for e3f00000,80000 old: write-back new: write-combining
mtrr: type mismatch for e3e00000,100000 old: write-back new: write-combining
mtrr: type mismatch for e3c00000,200000 old: write-back new: write-combining
mtrr: type mismatch for e3800000,400000 old: write-back new: write-combining
mtrr: type mismatch for e3000000,800000 old: write-back new: write-combining
mtrr: type mismatch for e2000000,1000000 old: write-back new: write-combining
mtrr: type mismatch for e0000000,2000000 old: write-back new: write-combining
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
Intel(R) PRO/1000 Network Driver - version 7.3.21-k4-NAPI
Copyright (c) 1999-2006 Intel Corporation.
[root@localhost ~]#
[root@localhost src]# uname -p
i686
[root@localhost ~]# lspci|grep Ethernet
00:19.0 Ethernet controller: Intel Corporation Unknown device 1503 (rev 05)
[root@localhost ~]# sudo lspci -vv
--------------------------------------------------------------
00:00.0 Host bridge: Intel Corporation Unknown device 0100 (rev 09)
Subsystem: Intel Corporation Unknown device 200d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:02.0 VGA compatible controller: Intel Corporation Sandy Bridge Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Unknown device 200d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe000000 (64-bit, non-prefetchable)
Region 2: Memory at e0000000 (64-bit, prefetchable)
Region 4: I/O ports at f000
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] #13 [0306]
00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04)
Subsystem: Intel Corporation Unknown device 200d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fe429000 (64-bit, non-prefetchable)
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
00:19.0 Ethernet controller: Intel Corporation Unknown device 1503 (rev 05)
Subsystem: Intel Corporation Unknown device 200d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe400000 (32-bit, non-prefetchable)
Region 1: Memory at fe428000 (32-bit, non-prefetchable)
Region 2: I/O ports at f080
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [e0] #13 [0306]
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 200d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 177
Region 0: Memory at fe427000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
Capabilities: [98] #13 [0306]
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05)
Subsystem: Intel Corporation Unknown device 200d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at fe420000 (64-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express Unknown type IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
Link: Latency L0s <64ns, L1 <1us
Link: ASPM Disabled CommClk- ExtSynch-
Link: Speed unknown, Width x0
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed unknown, Width x1, ASPM L0s L1, Port 1
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x1
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 0, PowerLimit 10.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Unknown, PwrInd Unknown, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 40c1
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Unknown device 200d
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 201
Region 0: Memory at fe426000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port
Capabilities: [98] #13 [0306]
00:1f.0 ISA bridge: Intel Corporation Unknown device 1c5c (rev 05)
Subsystem: Intel Corporation Unknown device 200d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Unknown device 200d
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 217
Region 0: I/O ports at f0d0
Region 1: I/O ports at f0c0
Region 2: I/O ports at f0b0
Region 3: I/O ports at f0a0
Region 4: I/O ports at f060
Region 5: Memory at fe425000 (32-bit, non-prefetchable)
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Address: fee02000 Data: 40d9
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] #12 [0010]
Capabilities: [b0] #13 [0306]
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05)
Subsystem: Intel Corporation Unknown device 200d
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 3
Region 0: Memory at fe424000 (64-bit, non-prefetchable)
Region 4: I/O ports at f040
01:00.0 PCI bridge: Integrated Technology Express, Inc. Unknown device 8892 (rev 30) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=01, secondary=02, subordinate=02, sec-latency=32
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [90] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a0] #0d [0000]
Please help me.
Thanks in advance.