hi, my sun box hangs- KEYBOARD not found. Using hyper link it boots and then hangs without able to access or get ok promt
----SCREEN SHOT AS--------------------------------------------------
�Loading onboard drivers: ebus i2c i2c i2c ppm
/ebus@1f,464000: flashprom rtc serial serial env-monitor i2c power
/ebus@1f,464000/i2c@3,80: gpio temperature temperature temperature front-io-fru-
prom sas-backplane-fru-prom dimm-spd psu-fru-prom hardware-monitor
/i2c@1f,520000: dimm-spd dimm-spd
/i2c@1f,530000: motherboard-fru-prom gpio clock-generator
/i2c@1f,462020: nvram idprom
Probing memory
CPU 0 Bank 2 base 200000000 size 1024 MB
NVRAM changes: 48b68
Probing I/O buses
System Reset: CPU Reset (SPOR)
Probing system devices
jbus at 0,0 SUNW,UltraSPARC-IIIi (1600 MHz @ 8:1, 1 MB) memory-controller
jbus at 1,0 Nothing there
jbus at 1c,0 Nothing there
jbus at 1d,0 Nothing there
jbus at 1e,0 pci
jbus at 1f,0 pci
Loading Support Packages: kbd-translator obp-tftp SUNW,i2c-ram-device SUNW,fru-d
evice SUNW,asr
Loading onboard drivers: ebus i2c i2c i2c ppm
/ebus@1f,464000: flashprom rtc serial serial env-monitor i2c power
/ebus@1f,464000/i2c@3,80: gpio temperature temperature temperature front-io-fru-
prom sas-backplane-fru-prom dimm-spd psu-fru-prom hardware-monitor
/i2c@1f,520000: dimm-spd dimm-spd
/i2c@1f,530000: motherboard-fru-prom gpio clock-generator
/i2c@1f,462020: nvram idprom
Probing memory
CPU 0 Bank 2 base 200000000 size 1024 MB
NVRAM changes: 48b68
Probing I/O buses
Sun Ultra 45 Workstation, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.25.9, 1024 MB memory installed, Serial #78653148.
Ethernet address 0:14:4f:b0:26:dc, Host ID: 84b026dc.
Boot device: disk File and args:
WARNING: msgsys:msginfo_msgtql is set more than once in /etc/system. "set msgsys
:msginfo_msgtql = 512" applied as the current setting.
WARNING: msgsys:msginfo_msgmax is set more than once in /etc/system. "set msgsys
:msginfo_msgmax = 8192" applied as the current setting.
WARNING: msgsys:msginfo_msgmnb is set more than once in /etc/system. "set msgsys
:msginfo_msgmnb = 262143" applied as the current setting.
WARNING: msgsys:msginfo_msgseg is set more than once in /etc/system. "set msgsys
:msginfo_msgseg = 768" applied as the current setting.
SunOS Release 5.10 Version Generic_118833-36 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: Failed to install "beep" driver.
Hostname: SSS2
DO NOT ENTER USERNAME AND PASSWORD AT THE 'console login:' PROMPT
Unless you are booting to single user (maintenance) mode.
If you are not booting to single user mode, you will be logged in and
the GUI will start up automatically in a few moments. It may look like
nothing is happening, but I'm doing lots of important stuff. Really.
checking ufs filesystems
/dev/rdsk/c1t0d0s4: is logging.
Oct 16 17:03:57 SSS2 named[396]: zone 0.0.127.IN-ADDR.ARPA/IN: loading master fi
le db.127.0.0: unknown class/type
HANGS FOR HRS_______ANY ADVISE TO GET OK PROMT PLS