# Sun Fire 280R

**URL:** <https://community.unix.com/t/sun-fire-280r/173720>\
**Category:** UNIX for Dummies Questions & Answers\
**Created:** [July 30, 2007, 7:32pm UTC](https://community.unix.com/t/sun-fire-280r/173720 "2007-07-30T19:32:24Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![larryase](https://community.unix.com/letter_avatar/larryase/32/5_5575768a8748004e209b776fc1b2916d.png) [@larryase](https://community.unix.com/u/larryase)\
**Post date:** [July 30, 2007, 7:32pm UTC](https://community.unix.com/t/sun-fire-280r/173720/1 "2007-07-30T19:32:24Z")

</div>

Hello all,

I'm lost and can't figure this problem out.  
I have a Sun fire 280R running Solaris 8. Everything was working great. I have one drive in bay 1(not 0). But when I reboot the system it trys to open files in /dev/rdsk/c1t1d0s0. Should it have been opeing /dev/rdsk/c1t0d0s0, the funning thing is that if I did a fsck on /dev/rdsk/c1t0d0s0 it finds the drive but if I try c1t1d0s0, it states not vaild. Any help would be great.

Thanks

---

<div class="post-metadata">

**Author:** ![DukeNuke2](https://community.unix.com/user_avatar/community.unix.com/dukenuke2/32/407_2.png) [@DukeNuke2](https://community.unix.com/u/DukeNuke2)\
**Post date:** [July 30, 2007, 7:44pm UTC](https://community.unix.com/t/sun-fire-280r/173720/2 "2007-07-30T19:44:17Z")

</div>

post the output of "probe-scsi-all" from the ok prompt. also "printenv" and "devalias".

---

<div class="post-metadata">

**Author:** ![larryase](https://community.unix.com/letter_avatar/larryase/32/5_5575768a8748004e209b776fc1b2916d.png) [@larryase](https://community.unix.com/u/larryase)\
**Post date:** [July 30, 2007, 8:04pm UTC](https://community.unix.com/t/sun-fire-280r/173720/3 "2007-07-30T20:04:12Z")

</div>

DukeNuke2,

In open boot things look correct the drive show ups, the enviorment boot disk show booting from /pci@8,6000/SUNW,qlc@4. It seem to start the boot, it show the correct hostname but then it can't open /dev/rdsk/c1t1/d0s0. It looks like the boot file may be bad. How would I fix this or check it.

Thanks

---

<div class="post-metadata">

**Author:** ![DukeNuke2](https://community.unix.com/user_avatar/community.unix.com/dukenuke2/32/407_2.png) [@DukeNuke2](https://community.unix.com/u/DukeNuke2)\
**Post date:** [July 30, 2007, 8:10pm UTC](https://community.unix.com/t/sun-fire-280r/173720/4 "2007-07-30T20:10:34Z")

</div>

please do a "boot -sv" and post the output.

---

<div class="post-metadata">

**Author:** ![larryase](https://community.unix.com/letter_avatar/larryase/32/5_5575768a8748004e209b776fc1b2916d.png) [@larryase](https://community.unix.com/u/larryase)\
**Post date:** [July 30, 2007, 10:56pm UTC](https://community.unix.com/t/sun-fire-280r/173720/5 "2007-07-30T22:56:58Z")

</div>

DukeNuke2,

After looking I came to the conclusion thet the scsi control is bad. When I put the dirve into bay 1(scsi target 1) it register as target 0. That is why it will not see c1t1d0s0. Does this sound right? That is all I can come up with.