Sun cluster 3.1

Hi,
I have upgraded a Sparc T2000 server which is node 2, in a Sun Cluster 3.1 two node cluster from Solaris 10 Update 2, to 10 Update 7. This is a requirement for a NetApps solution as we currently have a Sun 3510 SAN.

I am at a stage where I believe the two nodes will not communicate over the clprivnet . I should also note we have only upgraded one side of the cluster as production runs [currently] on node 1. I am trying to see the 3510 and at this point not concerned about the NetApp filer.

On booting into cluster mode (I can boot to level 3 outside of cluster) the errors in the console are:-

os-io Hostname: ztx-psdb-2

Jun  9 11:41:32 svc.startd[8]: svc:/system/pkgserv:default: Method "/usr/bin/pkgadm sync" failed with exit status 1.
Jun  9 11:41:32 svc.startd[8]: svc:/system/pkgserv:default: Method "/usr/bin/pkgadm sync" failed with exit status 1.
Jun  9 11:41:32 svc.startd[8]: svc:/system/pkgserv:default: Method "/usr/bin/pkgadm sync" failed with exit status 1.
Jun  9 11:41:33 svc.startd[8]: system/pkgserv:default failed: transitioned to maintenance (see 'svcs -xv' for details)
Loading smf(5) service descriptions: Jun  9 11:41:33 in.mpathd[224]: No test address configured on interface e1000g6; disabling probe-based failure detection on it
1/1
svccfg import warnings. See /var/svc/log/system-manifest-import:default.log .
Could not read symbolic link for: /dev/rdsk/c6t60A98000572D53644A4A626E586E3875d0s2 path not loaded
        No such file or directory
Could not read symbolic link for: /dev/rdsk/c6t60A98000572D53644A4A627869516452d0s2 path not loaded
        No such file or directory
Could not read symbolic link for: /dev/rdsk/c2t500A098599CB6C84d0s2 path not loaded
        No such file or directory
Could not read symbolic link for: /dev/rdsk/c4t500A098699CB6C84d0s2 path not loaded
        No such file or directory
Booting as part of a cluster
NOTICE: CMM: Node ztx-psdb-1 (nodeid = 1) with votecount = 1 added.
NOTICE: CMM: Node ztx-psdb-2 (nodeid = 2) with votecount = 1 added.
NOTICE: CMM: Quorum device 1 (/dev/did/rdsk/d3s2) added; votecount = 1, bitmask of nodes with configured paths = 0x3.
NOTICE: clcomm: Adapter e1000g7 constructed
NOTICE: clcomm: Path ztx-psdb-2:e1000g7 - ztx-psdb-1:e1000g7 being constructed
NOTICE: clcomm: Adapter e1000g5 constructed
NOTICE: clcomm: Path ztx-psdb-2:e1000g5 - ztx-psdb-1:e1000g5 being constructed
NOTICE: CMM: Node ztx-psdb-2: attempting to join cluster.
NOTICE: clcomm: Path ztx-psdb-2:e1000g7 - ztx-psdb-1:e1000g7 errors during initiation
WARNING: Path ztx-psdb-2:e1000g7 - ztx-psdb-1:e1000g7 initiation encountered errors, errno = 62. Remote node may be down or unreachable through this path.
NOTICE: clcomm: Path ztx-psdb-2:e1000g5 - ztx-psdb-1:e1000g5 errors during initiation
WARNING: Path ztx-psdb-2:e1000g5 - ztx-psdb-1:e1000g5 initiation encountered errors, errno = 62. Remote node may be down or unreachable through this path.
WARNING: CMM: Reading reservation keys from quorum device /dev/did/rdsk/d3s2 failed.
NOTICE: CMM: Cluster doesn't have operational quorum yet; waiting for quorum.

---------- Post updated 10-06-11 at 08:53 AM ---------- Previous update was 09-06-11 at 04:08 PM ----------

---------- Post updated at 08:54 AM ---------- Previous update was at 08:53 AM ----------

:wall: Fixed. I installed the latest patch cluster which although I had done previous to the upgrade there would be many patches not installed and quite a few downgraded for update 7.

I do still have an issue with the /etc/path_to_inst not updating but that is a relatively small issue :slight_smile: