empty
March 5, 2008, 11:16am
1
Hello,
Iam having problems getting more then one ip to work here is my setup!
Hostname: nexus
NIC: e000g1
(example ips)
My ips 80.80.80.15 to 80.80.80.20
Defaultrouter 80.80.80.1
nameservers 80.80.80.100 and 80.80.80.200
How would i do this? Any help would be mutch appriciated! Since my english isnt native so please explain as friendly as possible
Best regards emtpy
ok,
as friendly as possible:
go to:
System Administration Guide: IP Services
and read the manual... everything is very well explained. if you have specific problems, come back an we'll try to solve this.
good luck and have fun,
DN2
empty
March 6, 2008, 8:22am
3
Thanks for the link, but i cant actually find anything about adding the ip-adresses.
I got everything working with dhcp and such, but I cant find how to add more static ip-adresses to my nic e000g1
/empty
ggr
March 6, 2008, 11:44am
4
Hope this helps:
<root@agni-sol10> ifconfig hme0 plumb
<root@agni-sol10> ifconfig hme0
hme0: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
inet 0.0.0.0 netmask 0
ether 8:0:20:8f:42:f8
<root@agni-sol10> ifconfig hme0:1 plumb
<root@agni-sol10> ifconfig hme0:2 plumb
<root@agni-sol10> ifconfig hme0:3 plumb
<root@agni-sol10> for iii in hme0:1 hme0:2 hme0:3 hme0
> do
> ifconfig $iii
> done
hme0:1: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
inet 0.0.0.0 netmask 0
hme0:2: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
inet 0.0.0.0 netmask 0
hme0:3: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
inet 0.0.0.0 netmask 0
hme0: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
inet 0.0.0.0 netmask 0
ether 8:0:20:ee:42:f8
<root@agni-sol10> ifconfig hme0:1 11.22.33.44 netmask + broadcast + up
<root@agni-sol10> ifconfig hme0:2 11.22.33.55 netmask + broadcast + up
<root@agni-sol10> ifconfig hme0:3 11.22.33.66 netmask + broadcast + up
<root@agni-sol10> ifconfig hme0 11.22.33.100 netmask + broadcast + up
<root@agni-sol10> for iii in hme0:1 hme0:2 hme0:3 hme0 ^Jdo^Jifconfig $iii^Jdone
hme0:1: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
inet 11.22.33.44 netmask ff000000 broadcast 11.255.255.255
hme0:2: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
inet 11.22.33.55 netmask ff000000 broadcast 11.255.255.255
hme0:3: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
inet 11.22.33.66 netmask ff000000 broadcast 11.255.255.255
hme0: flags=1000803<UP,BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
inet 11.22.33.100 netmask ff000000 broadcast 11.255.255.255
ether 8:0:20:ee:42:f8
Of course you should make sure that you set this value in the eeprom.
local-mac-address?=true
-GGR
empty
March 8, 2008, 4:44pm
5
Thanks,
How do i set the netmask the interfaces should use? All use the same.
Tried edit netmask file but dident work.
Thanks bigtime GGR
post the file... it should work, so maybe you've done something wrog...
# cat /etc/netmasks
and let's have a look,
DN2
Did not work how? Please provide us with the steps you used to edit the /etc/inet/netmasks file and the steps you used to put into effect the netmasks.
btw. /etc/netmasks is a link to /etc/inet/netmasks so there is no problem with the path