hi
i have image SCo Unix 5.0.6 and I want transfer on my HP ML350 G5
after Transfer show this message :
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
this hp server used smart array E200i and P400 and sco not recognized HDD
tanks
You will have to supply a lot more information first.
How did you create the image, and what is the hardware configuration of that machine?
How did you configure the RAID on the new machine, and how did you restore the image?
The error message indicates that the file /stand/boot is either not found, or is corrupted.
i create and restore image with Acrones True Image Bootable
and Configure RAID IS 0 (RAID 0)
My SCo Is not recognized HDD .
How can I HDD SAS or SATA to detect it .
Windows identifies the (STAT and SAS)
The technique that you are using is only likely to work if the source and target machines are identical, both hardware and cmos/raid configuration.
How do I configure SAS drive on the PC first to detect on HP server ML350 G5
You will see a prompt to enter the raid configuration process during the system POST.
when i enter prompt this message show :
boot : prompt
invalid command
---------- Post updated at 10:52 AM ---------- Previous update was at 10:10 AM ----------
enter command :
fd(60)unix.Z root=hd(42)
continue proccess but this message show :
error 19 opening dumpdev (1/41)
dump not complated
The prompt to enter the raid config happens before the boot prompt.
---------- Post updated 12-17-16 at 07:37 AM ---------- Previous update was 12-16-16 at 12:16 PM ----------
Or boot from the HP Smartstart cd