Sco Openserver Starting TCP/IP Services

Hi all,

I have a customer whose sco unix server wasnt power off correctly and when booting it up I noticed that the boot up takes a while to finish the " Starting TCP services: snmpd routed lpd". after that the server is ready for login, but you cannot ping anything from the server (apart from the local IP) or ping the server from anywhere on the network.

any ideas would be much appreciated.

thanks!

Failed network card.
Network cable not plugged in correctly.
Faulty port on the hub/concentrator.
Network speed not synchronized

Check all the cables, then power down and do a cold boot.

jgt - I got this machine going after some diagnostics on NIC and replaced the network cable.

thanks for your reply!
cheers