I have a new SAN (Fujitsu Eternus 2000) and am trying to setup a veritas cluster on it, however veritas does not see all of the vluns I have exposed to the box. The OS does see them though. I have seen a lot of post about this, but it seems they are about people having just the opposite problem (seeing multiple disks). I only see two of the disks in vx but I see all nine in solaris.
I have nine volumes in a RAID1+0 group on the SAN.
There are two HBA ports, running to two different switches, that hit two interfaces on the SAN.
Im running Solaris10 and VCS5.0
Any idea what I am doing wrong ?
luxadm probe
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node WWN:500000e0d0147b00 Device Type:Disk device
Logical Path:/dev/rdsk/c2t500000E0D0147B86d0s2
Logical Path:/dev/rdsk/c3t500000E0D0147B06d0s2
Node WWN:500000e0d0147b00 Device Type:Disk device
Logical Path:/dev/rdsk/c2t500000E0D0147B86d1s2
Logical Path:/dev/rdsk/c3t500000E0D0147B06d1s2
Node WWN:500000e0d0147b00 Device Type:Disk device
Logical Path:/dev/rdsk/c2t500000E0D0147B86d2s2
Logical Path:/dev/rdsk/c3t500000E0D0147B06d2s2
Node WWN:500000e0d0147b00 Device Type:Disk device
Logical Path:/dev/rdsk/c2t500000E0D0147B86d3s2
Logical Path:/dev/rdsk/c3t500000E0D0147B06d3s2
Node WWN:500000e0d0147b00 Device Type:Disk device
Logical Path:/dev/rdsk/c2t500000E0D0147B86d4s2
Logical Path:/dev/rdsk/c3t500000E0D0147B06d4s2
Node WWN:500000e0d0147b00 Device Type:Disk device
Logical Path:/dev/rdsk/c2t500000E0D0147B86d5s2
Logical Path:/dev/rdsk/c3t500000E0D0147B06d5s2
Node WWN:500000e0d0147b00 Device Type:Disk device
Logical Path:/dev/rdsk/c2t500000E0D0147B86d6s2
Logical Path:/dev/rdsk/c3t500000E0D0147B06d6s2
Node WWN:500000e0d0147b00 Device Type:Disk device
Logical Path:/dev/rdsk/c2t500000E0D0147B86d7s2
Logical Path:/dev/rdsk/c3t500000E0D0147B06d7s2
Node WWN:500000e0d0147b00 Device Type:Disk device
Logical Path:/dev/rdsk/c2t500000E0D0147B86d8s2
Logical Path:/dev/rdsk/c3t500000E0D0147B06d8s2
Node WWN:500000e0d0147b00 Device Type:Disk device
Logical Path:/dev/rdsk/c2t500000E0D0147B86d9s2
Logical Path:/dev/rdsk/c3t500000E0D0147B06d9s2
vxdisk list
DEVICE TYPE DISK GROUP STATUS
c1t0d0s2 auto - - error
c1t1d0s2 auto - - error
c1t2d0s2 auto - - error
c1t3d0s2 auto - - error
c1t4d0s2 auto - - error
c1t5d0s2 auto - - error
c2t500000E0D0147B86d0s2 auto - - error
c2t500000E0D0147B86d9s2 auto - - error
/etc/vx/diag.d/vxdmpinq /dev/rdsk/c2t500000E0D0147B86d0s2
Inquiry for /dev/rdsk/c2t500000E0D0147B86d0s2, evpd 0x0, page code 0x0
Vendor id : FUJITSU
Product id : E2000
Revision : 0000
Serial Number : 00147B0000
/etc/vx/diag.d/vxdmpinq /dev/rdsk/c2t500000E0D0147B86d1s2
Inquiry for /dev/rdsk/c2t500000E0D0147B86d1s2, evpd 0x0, page code 0x0
Vendor id : FUJITSU
Product id : E2000
Revision : 0000
Serial Number : 00147B0001
/etc/vx/diag.d/vxdmpinq /dev/rdsk/c2t500000E0D0147B86d3s2
Inquiry for /dev/rdsk/c2t500000E0D0147B86d3s2, evpd 0x0, page code 0x0
Vendor id : FUJITSU
Product id : E2000
Revision : 0000
Serial Number : 00147B0003
/etc/vx/diag.d/vxdmpinq /dev/rdsk/c2t500000E0D0147B86d4s2
Inquiry for /dev/rdsk/c2t500000E0D0147B86d4s2, evpd 0x0, page code 0x0
Vendor id : FUJITSU
Product id : E2000
Revision : 0000
Serial Number : 00147B0004
..... didn't want to put all nine in .....
/etc/vx/diag.d/vxdmpinq /dev/rdsk/c2t500000E0D0147B86d9s2
Inquiry for /dev/rdsk/c2t500000E0D0147B86d9s2, evpd 0x0, page code 0x0
Vendor id : FUJITSU
Product id : E2000
Revision : 0000
Serial Number : 00147B0009
vxdmpadm getsubpaths ctlr=c2
NAME STATE[A] PATH-TYPE[M] DMPNODENAME ENCLR-TYPE ENCLR-NAME ATTRS
================================================================================
c2t500000E0D0147B86d0s2 ENABLED(A) - c2t500000E0D0147B86d0s2 FJ_E2000 FJ_E20000 -
c2t500000E0D0147B86d1s2 ENABLED(A) - c2t500000E0D0147B86d9s2 FJ_E2000 FJ_E20000 -
c2t500000E0D0147B86d2s2 ENABLED(A) - c2t500000E0D0147B86d9s2 FJ_E2000 FJ_E20000 -
c2t500000E0D0147B86d3s2 ENABLED(A) - c2t500000E0D0147B86d9s2 FJ_E2000 FJ_E20000 -
c2t500000E0D0147B86d4s2 ENABLED(A) - c2t500000E0D0147B86d9s2 FJ_E2000 FJ_E20000 -
c2t500000E0D0147B86d5s2 ENABLED(A) - c2t500000E0D0147B86d9s2 FJ_E2000 FJ_E20000 -
c2t500000E0D0147B86d6s2 ENABLED(A) - c2t500000E0D0147B86d9s2 FJ_E2000 FJ_E20000 -
c2t500000E0D0147B86d7s2 ENABLED(A) - c2t500000E0D0147B86d9s2 FJ_E2000 FJ_E20000 -
c2t500000E0D0147B86d8s2 ENABLED(A) - c2t500000E0D0147B86d9s2 FJ_E2000 FJ_E20000 -
c2t500000E0D0147B86d9s2 ENABLED(A) - c2t500000E0D0147B86d9s2 FJ_E2000 FJ_E20000 -
---------- Post updated at 03:10 PM ---------- Previous update was at 11:50 AM ----------
So it looks like all I was missing was a good old reboot.
I had previously loaded the ASL for the Eternus2000 (see Symantec Enabled Arrays - Array Support Library for Fujitsu ETERNUS DX60/DX80 and ETERNUS2000 Arrays (Active/Active) on Veritas Volume Manager (tm) 5.0 and 5.0MPx for Solaris (sparc) )
For the storage to be mapped properly, I had to reboot and start from a clean slate. (Thanks to Thomas Connerly @ symantec and his reply to an older post Gmane Loom )
Now, my disks are showing up properly:
vxdisk list
DEVICE TYPE DISK GROUP STATUS
c1t0d0s2 auto:none - - online invalid
c1t1d0s2 auto:none - - online invalid
c1t2d0s2 auto - - error
c1t3d0s2 auto - - error
c1t4d0s2 auto:none - - online invalid
c1t5d0s2 auto:none - - online invalid
c2t500000E0D0147B86d0s2 auto:none - - online invalid
c2t500000E0D0147B86d9s2 auto:none - - online invalid
c3t500000E0D0147B06d1s2 auto:none - - online invalid
c3t500000E0D0147B06d2s2 auto:none - - online invalid
c3t500000E0D0147B06d3s2 auto:none - - online invalid
c3t500000E0D0147B06d4s2 auto:none - - online invalid
c3t500000E0D0147B06d5s2 auto:none - - online invalid
c3t500000E0D0147B06d6s2 auto:none - - online invalid
c3t500000E0D0147B06d7s2 auto:none - - online invalid
c3t500000E0D0147B06d8s2 auto:none - - online invalid