Installation of Sco Openserver 5.0.7 on HP DC 7600

Hi All ,
I wanted to install SCO Open server 5.0.7 on HP DC7600 Desktop Machine, is there any bootloader and which site i can find it to enable me install it because the system is not recognizing the Hard disk just like the ML G Series machine installations.
Please help if you have done this before

Thanks for the help:wall:

Looking at the specs for the machine, I don't see why it shouldn't install. Check the CMOS to see if the SATA drive is set to legacy. The Broadcom network card might work, or you may have to install the Intel card.

jgt Thanks, However, the only close information close to this is IDE/SATA and i juggle the CMos dma/ultima value i got the same result "hd: no root hard disk controller was found hd: a boot time loadable driver may be required" as part of the hwconfig i saw %udi - udi environment

and ha=0 type=usb_msto UDI SCSI HBA
please help:wall:

This is a long read, but you may find something here.
OpenServer 5.0.7:Late News
And this,
The SCO Group, Inc. | Support | Update | Download | Release

Try using the WD BTLD: What is wd_v2.0_btld.img, the updated wd driver for SCO OpenServer 5.0.7?