hi folks,
i've got a blank hp visualize C3000 workstation and installed HP-UX 11.11. When I want to start X, I get the following error message:
# X
Fatal server error:
Couldn't open X pointer device! Is one attached?
I've connected an mouse and a keyboard with an usb/ps2 connector. ioscan lists them:
H/W Path Class Description
====================================================
bc
10 ioa System Bus Adapter (582)
10/0 ba Local PCI Bus Adapter (782)
10/0/12/0 lan HP PCI 10/100Base-TX Core
10/0/13/0 audio Built-in Audio
10/0/14/0 ext_bus IDE
10/0/14/0.0 target
10/0/14/0.0.0 disk MATSHITACD-ROM CR-594
10/0/14/0.7 target
10/0/14/0.7.0 ctl Initiator
10/0/14/1 ba PCI Core I/O Adapter
10/0/14/1/1 tty Built-in RS-232C
10/0/14/1/2 tty Built-in RS-232C
10/0/14/1/3 ext_bus Built-in Parallel Interface
10/0/14/2 usb Built-in USB Interface
10/0/14/2.1 usbhub USB Root Hub
10/0/14/2.1.2 usbhid USB HID Kbd(0) Mouse(1)
10/0/15/0 ext_bus SCSI C896 Ultra Narrow Single-Ended
10/0/15/0.7 target
10/0/15/0.7.0 ctl Initiator
10/0/15/1 ext_bus SCSI C896 Ultra2 Wide LVD
10/0/15/1.6 target
10/0/15/1.6.0 disk SEAGATE ST39102LC
10/0/15/1.7 target
10/0/15/1.7.0 ctl Initiator
10/1 ba Local PCI Bus Adapter (782)
10/4 ba Local PCI Bus Adapter (782)
10/6 ba Local PCI Bus Adapter (782)
10/6/2/0 graphics PCI Display (103c1008)
32 processor Processor
49 memory Memory
can somebody help me?