How will the solaris 5.8(2.8) list the power supply units if we have
2 powersupply in the box.
We know, if there are 2 disks it would list for ex:- as disk01, disk02. This is just for sake of example & I know this is not the
actual.
But I want to know, the actual list of powersupply present in the system.
Can any body tell us any utility in solaris 5.8 that will list all the
hardware available & along with the powersupply units.
I want to specifically Identify the powersupply units.
Regards
Vishwa.
Try /usr/platform/`uname -i`/sbin/prtdiag -v
You should get output that shows the power supplies and status
(Example from an E3500):
% prtdiag -v|more
System Configuration: Sun Microsystems sun4u 5-slot Sun Enterprise E3500
System clock frequency: 84 MHz
Memory size: 4096Mb
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
5 10 0 336 4.0 US-II 2.0
5 11 1 336 4.0 US-II 2.0
7 14 0 336 4.0 US-II 2.0
7 15 1 336 4.0 US-II 2.0
========================= Memory =========================
Intrlv. Intrlv.
Brd Bank MB Status Condition Speed Factor With
--- ----- ---- ------- ---------- ----- ------- -------
5 0 1024 Active OK 60ns 4-way A
5 1 1024 Active OK 60ns 4-way A
7 0 1024 Active OK 60ns 4-way A
7 1 1024 Active OK 60ns 4-way A
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- -------------------------------- ----------------------
1 SBus 25 0 QLGC,isp/sd (block) QLGC,ISP1000U
1 SBus 25 1 SUNW,qfe SUNW,sbus-qfe
1 SBus 25 1 SUNW,qfe SUNW,sbus-qfe
1 SBus 25 1 SUNW,qfe SUNW,sbus-qfe
1 SBus 25 1 SUNW,qfe SUNW,sbus-qfe
1 SBus 25 2 QLGC,isp/sd (block) QLGC,ISP1000U
1 SBus 25 3 SUNW,hme
1 SBus 25 3 SUNW,fas/sd (block)
1 SBus 25 13 SUNW,socal/sf (scsi-3) 501-3060
3 SBus 25 0 QLGC,isp/sd (block) QLGC,ISP1000U
3 SBus 25 2 QLGC,isp/sd (block) QLGC,ISP1000U
3 SBus 25 3 SUNW,hme
3 SBus 25 3 SUNW,fas/sd (block)
3 SBus 25 13 SUNW,socal/sf (scsi-3) 501-3060
No failures found in System
===========================
No System Faults found
======================
Most recent AC Power Failure:
=============================
Fri Apr 5 08:19:58 2002
========================= Environmental Status =========================
Keyswitch position is in Normal Mode
System Power Status: Redundant
System LED Status: GREEN YELLOW GREEN
Normal ON OFF BLINKING
Fans:
-----
Unit Status
---- ------
Disk OK
System Temperatures (Celsius):
------------------------------
Brd State Current Min Max Trend
--- ------- ------- --- --- -----
1 OK 38 38 43 stable
3 OK 46 45 49 stable
5 OK 46 43 52 stable
7 OK 39 37 44 stable
CLK OK 38 38 42 stable
Power Supplies:
---------------
Supply Status
--------- ------
1 OK
3 OK
5 OK
2nd PPS OK
PPS OK
System 3.3v OK
System 5.0v OK
Peripheral 5.0v OK
Peripheral 12v OK
Auxilary 5.0v OK
Peripheral 5.0v precharge OK
Peripheral 12v precharge OK
System 3.3v precharge OK
System 5.0v precharge OK
AC Power OK
========================= HW Revisions =========================
ASIC Revisions:
---------------
Brd FHC AC SBus0 SBus1 PCI0 PCI1 FEPS Board Type Attributes
--- --- -- ----- ----- ---- ---- ---- ---------- ----------
1 1 5 1 1 22 Dual-SBus-SOC+ 100MHz Capable
3 1 5 1 1 22 Dual-SBus-SOC+ 100MHz Capable
5 1 5 CPU 100MHz Capable
7 1 5 CPU 100MHz Capable
System Board PROM revisions:
----------------------------
Board 1: FCODE 1.8.7 1997/12/08 15:39 iPOST 3.4.8 1998/10/27 12:24
Board 3: FCODE 1.8.7 1997/12/08 15:39 iPOST 3.4.8 1998/10/27 12:24
Board 5: OBP 3.2.19 1998/10/20 18:13 POST 3.9.8 1998/11/09 15:09
Board 7: OBP 3.2.19 1998/10/20 18:13 POST 3.9.8 1998/11/09 15:09
1 Like