How to find port number wwn of particular port on dual port HBA,?

UNIX Solaris
1

please find the below o/p for your reference

bash-3.00#

fcinfo hba-port
HBA Port WWN: 21000024ff295a34
        OS Device Name: /dev/cfg/c2
        Manufacturer: QLogic Corp.
        Model: 375-3356-02
        Firmware Version: 05.03.02
        FCode/BIOS Version:  BIOS: 2.02; fcode: 2.01; EFI: 2.00;
        Serial Number: 0402R00-1023835637
        Driver Name: qlc
        Driver Version: 20100301-3.00
        Type: unknown
        State: offline
        Supported Speeds: 1Gb 2Gb 4Gb
        Current Speed: not established
        Node WWN: 20000024ff295a34
HBA Port WWN: 21000024ff295a35
        OS Device Name: /dev/cfg/c3
        Manufacturer: QLogic Corp.
        Model: 375-3356-02
        Firmware Version: 05.03.02
        FCode/BIOS Version:  BIOS: 2.02; fcode: 2.01; EFI: 2.00;
        Serial Number: 0402R00-1023835637
        Driver Name: qlc
        Driver Version: 20100301-3.00
        Type: N-port
        State: online
        Supported Speeds: 1Gb 2Gb 4Gb
        Current Speed: 4Gb
        Node WWN: 20000024ff295a35

kindly let me know how can we identify which wwn number is of which port on dual port HBA card

2

You have two port wwn and two node wwn listed there.

You want to know which port is which?

I suggest connecting a device to one of the ports and then listing devices.

Also, have you downloaded Qlogic's scli utility. Seriously good.

3

you could also disconnect one connection and see which one drops to offline. But I see that one is already offline, so the one that has the connection is c3.

4

not sure if you still need it but this is the command to tell you if there is something connected in the port:

luxadm -e port