Hi,
Is it possible to manually set the sc/rsc netmgt port speed and duplex settings, rather than have it auto-negotiate?
How do you see what speed the port is currently connected at, from the host side (not from switch or router)?
Thanks
It may be possible under some LOMs, but all the ones I've worked with are stuck on auto-neg.
If you need to have it at a particular speed, the best I can suggest is to force the switch port to that so the LOM follows suit.
And also there are only few much param where you can manipulate the settings.. but not on speed or duplex.
if_network="true"
if_modem="false"
if_connection="ssh"
if_emailalerts="false"
sys_autorestart="xir"
sys_bootrestart="none"
sys_bootfailrecovery="none"
sys_maxbootfail="3"
sys_xirtimeout="900"
sys_boottimeout="900"
sys_wdttimeout="60"
netsc_tpelinktest="true"
netsc_dhcp="false"
netsc_ipaddr="192.168.1.5"
netsc_ipnetmask="255.255.255.0"
netsc_ipgateway="192.168.1.1"
mgt_mailhost=""
mgt_mailalert=""
sc_customerinfo=""
sc_escapechars="#."
sc_powerondelay="false"
sc_powerstatememory="false"
sc_clipasswdecho="true"
sc_cliprompt="sc"
sc_clitimeout="0"
sc_clieventlevel="2"
sc_backupuserdata="true"
sys_eventlevel="2