Hi,
I wanted to configure new iscsi port on HPUX system, i added the target port address and configured it, once done, went to array side and searched for that host iqn number , but was nt able to find the same, came to host, then when i ran "iscsiutil -pVS" command it gave me below result
Session information
-------------------
Session # 1
------------
Session Instance No. : 1
ISID : 0x800000000001
Session State : Offline
Target Name : iqn.2000-05.com.3pardata:20220002ac004445
Target Alias :
No. of Target Addresses : 1
Address # 1
------------
IP Address : 15.213.64.197
iSCSI TCP Port : 3260
iSCSI Portal Group Tag : 22
User Configured:
----------------
Authenticaton Method :
CHAP Method : CHAP_UNI
Initiator CHAP Name :
CHAP Secret :
Header Digest : None,CRC32C (default)
Data Digest : None,CRC32C (default)
Login Keys:
-----------
MaxConnections : 1
AuthMethod Proposed : None
AuthMethod Chosen : None
MaxRecvDataSegmentLength : 16384 bytes
MaxBurstLength : 262144 bytes
FirstBurstLength : 65536 bytes
DefaultTime2Wait : 2 seconds
DefaultTime2Retain : 20 seconds
MaxOutstandingR2T : 1
ErrorRecoveryLevel : 0 (Session failure recovery)
InitialR2T : Yes
ImmediateData : No
DataPDUInOrder : Yes
DataSequenceInOrder : Yes
OFMarker : No
IFMarker : No
OFMarkInt : 0
IFMarkInt : 0
DataDigest Proposed : None,CRC32C
DataDigest Chosen : None
HeaderDigest Proposed : None,CRC32C
HeaderDigest Chosen : None
TargetAddress : 15.213.64.197:3260,22
Here in the output, the "session State" is showing as "offline", is that the reason for host not getting listed on Array side.
And how to make it online...?
Any help is appreciated here.
Thanks,
Vinay